| 数据搜索系统,热门电子元器件搜索 |
|
USB5533B 数据表(PDF) 34 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
USB5533B 数据表(HTML) 34 Page - Microchip Technology |
|
34 / 71 page ![]() USB5533B DS00001680C-page 34 2012 - 2015 Microchip Technology Inc. 5.5.4.7 Port Power Status (81h) Data1 of the memory is written by the SMBus master and after the command is executed Data 2-6 will be populated with the status of each port. A ‘1’ means the port power is enabled, a ‘0’ means the port power is disabled. Data1 is a port mask where each bit represents the port status to return. Bit 0 is the upstream port, bit 1 is the down- stream port 1, etc. 5.5.4.8 Port Force Disable (82h) Data1 of the memory is the port mask and Data 2-6 is the port disable state requested. Data1 is a port mask where each bit represents the port status to return. Bit 0 is the upstream port, bit 1 is the down- stream port 1, etc. The port disable byte will be interpreted as follows: 5.5.4.9 Port DP/DM Status (83h) Data1 of the memory is written by the SMBus master and after the command is executed Data 2-6 will be populated with the status of each port. Data1 is a port mask where each bit represents the port status to return. Bit 0 is the upstream port, bit 1 is the down- stream port 1, etc. The port DP/DM status byte can be interpreted as follows: 1 USB2_CONNECT R 0 = No USB2 connection detected. (HS/FS/LS) 1 = USB2 connection detected. 0 USB3_CONNECT R 0 = No USB3 connection detected. 1 = USB3 connection detected. TABLE 5-10: HUB INFORMATION PORT_DISABLE (0X82) Port Disable Bit Name R/W Description 7 OVERWRITE W If this bit is 1 then the data in bits 2:0 will be overwritten. 6:3 Reserved W Reserved 2 FORCE_OFF W 0 = Port Power controlled by hub. 1 = Port Power forced off. 1 USB3_TERM_DIS W 0 = USB3 Terminations controlled by hub. 1 = USB3 Terminations disabled. 0 USB2_TERM_DIS W 0 = USB2 Terminations controlled by hub. 1 = USB2 Terminations disabled. TABLE 5-11: PORT DP/DM STATUS PORT_DPDM (0X83) Port DP/DM Status Bit Name R/W Description 7:2 Reserved W Reserved 1 FS_DM W 0 = DM line is below the FS threshold. 1 = DM line is above the FS threshold (LS idle state) 0 FS_DP W 0 = DP line is below the FS threshold. 1 = DP line is above the FS threshold. (FS idle state) TABLE 5-9: HUB INFORMATION (CONTINUED) PORT_CONNECT (0X80) Port Connect Status Bit Name R/W Description |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |