USB3300 datasheet(1/53 Pages) MICROCHIP

部件名	USB3300

功能描述	Hi-Speed USB Host, Device or OTG PHY

PDF	53 Pages

Scroll/Zoom	100%

制造商	MICROCHIP [Microchip Technology]

网页	http://www.microchip.com

标志

1 / 53 page

 2014-2015 Microchip Technology Inc.

DS00001783B-page 1

Product Features

• USB-IF Hi-Speed certified to the Universal Serial

Bus Specification Rev 2.0

• Interface compliant with the ULPI Specification

revision 1.1 in 8-bit mode

• Industry standard UTMI+ Low Pin Interface (ULPI)

Converts 54 UTMI+ signals into a standard 12 pin

Link controller interface

• 54.7mA Unconfigured Current (typical) - ideal for

bus powered applications

• 83uA suspend current (typical) - ideal for battery

powered applications

• Latch-Up performance exceeds 150 mA per EIA/

JESD 78, Class II

• ESD protection levels of ±8kV HBM without exter-

nal protection devices

• Integrated protection to withstand IEC61000-4-2

ESD tests (±8kV contact and ±15kV air) per 3rd

party test facility

• Supports FS pre-amble for FS hubs with a LS

device attached (UTMI+ Level 3)

• Supports HS SOF and LS keep-alive pulse

• Includes full support for the optional On-The-Go

(OTG) protocol detailed in the On-The-Go Sup-

plement Revision 1.0a specification

• Supports the OTG Host Negotiation Protocol

(HNP) and Session Request Protocol (SRP)

• Allows host to turn VBUS off to conserve battery

power in OTG applications

• Supports OTG monitoring of VBUS levels with

internal comparators. Includes support for an

external VBUS or fault monitor.

• Low Latency Hi-Speed Receiver (43 Hi-Speed

clocks Max) allows use of legacy UTMI Links with

a ULPI wrapper

• Integrated Pull-up resistor on STP for interface

protection allows a reliable Link/PHY start-up with

slow Links (software configured for low power)

• Internal 1.8 volt regulators allow operation from a

single 3.3 volt supply

• Internal short circuit protection of ID, DP and DM

lines to VBUS or ground

• Integrated 24MHz Crystal Oscillator supports

either crystal operation or 24MHz external clock

input

• Internal PLL for 480MHz Hi-Speed USB operation

• Industrial Operating Temperature -40

°C to +85°C

• 32 pin, QFN RoHS Compliant package

(5 x 5 x 0.90 mm height)

Applications

The USB3300 is the ideal companion to any ASIC, SoC

or FPGA solution designed with a ULPI Hi-Speed USB

host, peripheral or OTG core.

The USB3300 is well suited for:

• Cell Phones

•PDAs

• MP3 Players

• Scanners

• External Hard Drives

• Digital Still and Video Cameras

• Portable Media Players

• Printers

USB3300

Hi-Speed USB Host, Device or OTG PHY with

ULPI Low Pin Interface

类似零件编号 - USB3300

制造商	部件名	数据表	功能描述
SMSC Corporation	USB3300	344Kb / 11P	HI SPEED USB HOST OR DEVICE PHY WITH ULPI LOW PIN INTERFACE
	USB3300	719Kb / 49P	Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface
	USB3300	960Kb / 55P	Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface
	USB3300-EZK	344Kb / 11P	HI SPEED USB HOST OR DEVICE PHY WITH ULPI LOW PIN INTERFACE
	USB3300-EZK	719Kb / 49P	Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface

More results

类似说明 - USB3300

制造商	部件名	数据表	功能描述
SMSC Corporation	USB3300	344Kb / 11P	HI SPEED USB HOST OR DEVICE PHY WITH ULPI LOW PIN INTERFACE
	USB3450	1Mb / 40P	HI-SPEED USB HOST OR DEVICE PHY WITH UTMIINTERFACE
	USB3280	977Kb / 42P	Hi-Speed USB Device PHY with UTMI Interface
	USB3300	719Kb / 49P	Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface
	USB3500	749Kb / 46P	Hi-Speed USB Host, Device or OTG PHY With UTMI Interface
	USB3300	960Kb / 55P	Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface
Microchip Technology	USB3300-EZK	676Kb / 59P	Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface Revision 1.1 01-24-13
	USB3300-EZK	676Kb / 59P	Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface Revision 1.1 01-24-13
	USB3500	792Kb / 45P	Hi-Speed USB Host, Device or OTG PHY 07/14/15
	USB3450	740Kb / 39P	Hi-Speed USB Host or Device PHY With UTMI Interface 07/14/15