| 数据搜索系统,热门电子元器件搜索 |
|
STRFNFCA 数据表(PDF) 48 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STRFNFCA 数据表(HTML) 48 Page - STMicroelectronics |
|
48 / 74 page ![]() Electrical characteristics STRFNFCA 48/74 Doc ID 023077 Rev 10 6.3 Power consumption characteristics TA = –25°C to 85°C, unless otherwise specified. The STRFNFCA supports two VPS_TX supply ranges for RF drivers: 2.7V to 3.3V or 4.5V to 5.5V. Antenna matching circuit must be defined accordingly. Table 39. Power consumption characteristics (VPS_Main from 2.7 to 3.3 V) Symbol Parameter Condition Typ. Max. Unit ICC (VPS) Power-up Supply current in power-up state TA = 25°C 200 600 µA ICC (VPS) Card Emulation Supply current in Card Emulation mode TA = 25°C 2.5 5.0 mA ICC (VPS) Hibernate Supply current in Hibernate state TA = 25°C 1 5 µA ICC (VPS) Sleep/Field Detector Supply current in Sleep/Field Detector state TA = 25°C 20/25 80 µA ICC (VPS) Ready Supply current in Ready state TA = 25°C 2.5 5.0 mA ICC (VPS) Tag Detect Average supply current in Tag Detector state TA = 25°C, 4RF bursts per second 50 100 µA Table 40. Power consumption characteristics (VPS_TX from 2.7 to 3.3 V) Symbol Parameter Condition Typ. Max. Unit ICC RF (VPS_TX) RF Field ON Supply current in RF Field (Reader mode) (1) 1. Parameter measured using recommended output matching network. (Z load is 27 Ω and 0°). TA = 25°C 70 100 mA ICC RF (VPS_TX) RF Field OFF Supply current in RF Field (Ready mode) (2) 2. This consumption can be reduced to approximately 2 µA (typ.) by setting a control bit (bit HF2RF) to ‘1’ using command 090468010710. In this case, Reader mode is not available. To re-enable Reader mode, reset the HF2RF bit to ‘0’ using the command 090468010700 or execute a new PROTOCOLSELECT command. TA = 25°C 200 µA ICC RF (VPS_TX) Tag Detect Peak(3) current during Burst detection 3. The maximum differential input voltage between pins RX1 and RX2 (VRx1-Rx2) has a peak-peak of 18 V. TA = 25°C 70 100 mA Table 41. Power consumption characteristics (VPS_TX from 4.5 to 5.5 V) Symbol Parameter Condition Typ. Max. Unit ICC RF (VPS_TX) RF Field ON Supply current in RF Field (Reader mode) (1) 1. Parameter measured using recommended output matching network. (Z load is 16 Ω and 0°). TA = 25°C 120 200 mA ICC RF (VPS_TX) RF Field OFF Supply current in RF Field (Ready mode) (2) TA = 25°C 300 µA ICC RF (VPS_TX) Tag Detect Peak(3) current during Burst detection TA = 25°C 120 200 mA |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |