LSM6DS3H datasheet(86/104 Pages) STMICROELECTRONICS

86 / 104 page

LSM6DS3H

86/104

DocID028370 Rev 4

9.84

OUT_MAG_RAW_Z_L (6Ah)

External magnetometer raw data (r).

9.85

OUT_MAG_RAW_Z_H (6Bh)

External magnetometer raw data (r).

9.86

CTRL_SPIAux (70h)

Table 203. OUT_MAG_RAW_Z_L register

Table 204. OUT_MAG_RAW_Z_L register description

D[7:0]

Z-axis external magnetometer value (LSbyte)

Table 205. OUT_MAG_RAW_Z_H register

D15

D14

D13

D12

D11

D10

Table 206. OUT_MAG_RAW_Z_H register description

D[15:8]

Z-axis external magnetometer value (MSbyte)

Table 207. CTRL_SPIAux register

BLE_SPI2

0(1)

1. This bit must be set to '0' for the correct operation of the device.

SPI_READ

_EN

0(1)

3.3KHz_

SPI2_EN

Table 208. CTRL_SPIAux register description

BLE_SPI2

Big/little endian selection (same as primary interface bit)

SPI_READ_EN

Set to ‘1’ to enable 3-wire SPI read (mandatory with current substrate but ASIC

default compatible with 4-wire SPI)

3.3KHz_SPI2_EN

Enable output @ 3.3 kHz and FS = 250 dps on output data registers (22h to 27h)

read by SPI2.

LSM6DS3H 数据表(PDF) 86 Page - STMicroelectronics

LSM6DS3H 数据表(HTML) 86 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载