STM32F479AI datasheet(137/208 Pages) STMICROELECTRONICS

137 / 208 page

DocID028010 Rev 2

137/208

STM32F479xx

Electrical characteristics

187

5.3.22

TIM timer characteristics

The parameters given in Table 62 are guaranteed by design. Refer to Section 5.3.20 for

details on the input/output alternate function characteristics (output compare, input capture,

external clock, PWM output).

5.3.23

Communications interfaces

I2C interface characteristics

The I2C interface meets the timings requirements of the I2C-bus specification and user

manual rev. 03 for:

•

Standard-mode (Sm): with a bit rate up to 100 kbit/s

•

Fast-mode (Fm): with a bit rate up to 400 kbit/s.

The I2C timings requirements are guaranteed by design when the I2C peripheral is properly

configured (refer to RM0386 reference manual).

The SDA and SCL I/O requirements are met with the following restrictions: the SDA and

SCL I/O pins are not “true” open-drain. When configured as open-drain, the PMOS

connected between the I/O pin and VDD is disabled, but is still present. Refer to

Section 5.3.20 for more details on the I2C I/O characteristics.

All I2C SDA and SCL I/Os embed an analog filter. Refer to the table below for the analog

filter characteristics:

Table 62. TIMx characteristics(1)(2)

1. TIMx is used as a general term to refer to the TIM1 to TIM12 timers.

2. Guaranteed by design.

Symbol

Parameter

Conditions(3)

3. The maximum timer frequency on APB1 or APB2 is up to 180 MHz, by setting the TIMPRE bit in the

RCC_DCKCFGR register, if APBx prescaler is 1 or 2 or 4, then TIMxCLK = HCKL, otherwise TIMxCLK =

4x PCLKx.

Min

Max

Unit

tres(TIM)

Timer resolution time

AHB/APBx prescaler=1

or 2 or 4, f

TIMxCLK =

180 MHz

tTIMxCLK

AHB/APBx prescaler>4,

fTIMxCLK = 90 MHz

tTIMxCLK

fEXT

Timer external clock

frequency on CH1 to CH4 f

TIMxCLK = 180 MHz

fTIMxCLK/2

MHz

ResTIM

Timer resolution

16/32

bit

tMAX_COUNT

Maximum possible count

with 32-bit counter

65536 ×

65536

tTIMxCLK

Table 63. I2C analog filter characteristics(1)

Symbol

Parameter

Min

Max

Unit

tAF

Maximum pulse width of spikes

that are suppressed by the analog

filter

50(2)

150(3)

STM32F479AI 数据表(PDF) 137 Page - STMicroelectronics

STM32F479AI 数据表(HTML) 137 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

STM32F479AI 数据表(PDF) 137 Page - STMicroelectronics

STM32F479AI 数据表(HTML) 137 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载