TLH9264 – 13

FIGURE 7 B Channel Interface Timing Slave Mode

Typical Applications

TLH9264 – 11

FIGURE 8 Typical Application for Slave End

Note 1

The TP3401 may also be used in this configuration with an external MCLK source

Note 2

The TP30756 Programmable Combos also must be connected to the MICROWIRE interface

Note 3

Only necessary if a mechanical Hookswitch is connected to the NMI input of the HPC

Note 4

Crystal load capacitors include board and trace capacitance Oscillator frequency can be checked by measuring the BCLK output frequency when slave

mode part is in digital loopback

7