STM32F413RHT6 datasheet(125/207 Pages) STMICROELECTRONICS

部件名	STM32F413RHT6

功能描述	ARM-Cortex-M4 32b MCUFPU, 125 DMIPS, up to 1.5MB Flash, 320KB RAM, USB OTG FS, 1 ADC, 2 DACs, 2 DFSDMs

PDF	207 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

125 / 207 page

DocID029162 Rev 2

125/207

STM32F413xG/H

Electrical characteristics

174

Figure 35. FT/TC I/O input characteristics

Output driving current

The GPIOs (general purpose input/outputs) can sink or source up to

±8 mA, and sink or

source up to

±20 mA (with a relaxed VOL/VOH) except PC13, PC14 and PC15 which can

sink or source up to

±3mA. When using the PC13 to PC15 GPIOs in output mode, the speed

should not exceed 2 MHz with a maximum load of 30 pF.

In the user application, the number of I/O pins which can drive current must be limited to

respect the absolute maximum rating specified in Section 6.2. In particular:

•

The sum of the currents sourced by all the I/Os on VDD, plus the maximum Run

consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating

ΣIVDD (see Table 14).

•

The sum of the currents sunk by all the I/Os on VSS plus the maximum Run

consumption of the MCU sunk on VSS cannot exceed the absolute maximum rating

ΣIVSS (see Table 14).

Output voltage levels

Unless otherwise specified, the parameters given in Table 59 are derived from tests

performed under ambient temperature and VDD supply voltage conditions summarized in

Table 16. All I/Os are CMOS and TTL compliant.

STM32F413RHT6 数据表(PDF) 125 Page - STMicroelectronics