T89C5115-RATIM datasheet(38/105 Pages) ATMEL

38 / 105 page

T89C5115

4128A–8051–04/02

In-System

Programming (ISP)

With the implementation of the User Space (FM0) and the Boot Space (FM1) in Flash

technology the T89C5115 allows the system engineer the development of applications

with a very high level of flexibility. This flexibility is based on the possibility to alter the

customer program at any stages of a product’s life:

•

Before assembly the 1st personalization of the product by programming in the FM0

and if needed also a customized Boot loader in the FM1.

Atmel provide also a standard Boot loader by default UART

•

After assembling on the PCB in its final embedded position by serial mode via the

UART.

This In-System Programming (ISP) allows code modification over the total lifetime of the

product.

Besides the default Boot loader Atmel provide to the customer also all the needed Appli-

cation-Programming-Interfaces (API) which are needed for the ISP. The API are located

also in the Boot memory.

This allow the customer to have a full use of the 16-Kbyte user memory.

Flash Programming and

Erasure

There are three methods of programming the Flash memory:

•

The Atmel bootloader located in FM1 is activated by the application. Low level API

routines (located in FM1)will be used to program FM0. The interface used for serial

downloading to FM0 is the UART. API can be called also by user’s bootloader

located in FM0 at [SBV]00h.

•

A further method exist in activating the Atmel boot loader by hardware activation.

•

The FM0 can be programmed also by the parallel mode using a programmer.

Figure 16. Flash Memory Mapping

F800h

3FFFh

16-KB

Flash memory

2K Bytes IAP

bootloader

FM0

FM1

Custom

Boot Loader

[SBV]00h

FFFFh

FM1 mapped between F800h and FFFFh

when API called

0000h

T89C5115-RATIM 数据表(PDF) 38 Page - ATMEL Corporation

T89C5115-RATIM 数据表(HTML) 38 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载