ZSC31150 Datasheet

© 2016 Integrated Device Technology, Inc.

2

December 6, 2016

PGA

TS

ADC

CMC

ROM

RAM

EEPROM

DAC

BAMP

ZACwire™

Analog Block

Digital Block

ZSC31150

Digital

Data I/O

Analog

Out

ZSC31150

Block Diagram

Ordering Information

Sales Code

Description

Package

ZSC31150GE

ZSC31150 Die – Temperature range: -40°C to +150°C

Unsawn on Wafer: add “B” to sales code

Sawn on Wafer Frame: add “C”

Waffle Pack: add “D”

ZSC31150GEG2-R

ZSC31150 14-DFN (5

 4 mm; wettable flanks) – Temperature

range: -40°C to 150°C

Tape and Reel

ZSC31150GAG2-R

ZSC31150 14-DFN (5

 4 mm; wettable flanks) – Temperature

range: -40°C to 125°C

Tape and Reel

ZSC31150GAB

ZSC31150 Die – Temperature range: -40°C to +125°C

Unsawn on Wafer

ZSC31150GAC

ZSC31150 Die – Temperature range: -40°C to +125°C

Sawn on Wafer Frame

ZSC31150GEG1

ZSC31150 14-SSOP – Temperature range: -40°C to +150°C

Tube: add “-T” to sales code

Tape & Reel: add “-R”

ZSC31150GLG1

ZSC31150 14-SSOP – Temperature range: -40°C to +150°C

(Long life: 5000h @150°C)

ZSC31150GAG1

ZSC31150 14-SSOP – Temperature range: -40°C to +125°C

ZSC31150KITV1P2

ZSC31150 SSC Evaluation Kit V1.2: Three interconnecting boards, five ZSC31150 SSOP14 samples, USB cable

(software can be downloaded from product page at www.IDT.com/ZSC31150)

ZSC31150MCSV1P1

Modular Mass Calibration System (MSC) V1.1 for ZSC31150: MCS boards, cable, connectors (software can be

downloaded from product page)

Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138

www.IDT.com

Sales

1-800-345-7015 or 408-284-8200

Fax: 408-284-2775

www.IDT.com/go/sales

Tech Support

www.IDT.com/go/support

DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance

specifications and operating parameters of the described products are determined in an independent state and are not guarante ed to perform the same way when installed in customer products. The

information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose,

an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual

property rights of IDT or any third parties.

IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be

reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the

property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of

Integrated Device Technology, Inc. All rights reserved.