SC16C752B datasheet(1/47 Pages) PHILIPS

部件名	SC16C752B

功能描述	5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs

PDF	47 Pages

Scroll/Zoom	100%

制造商	PHILIPS [NXP Semiconductors]

网页	http://www.nxp.com

标志

1 / 47 page

SC16C752B

5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with

64-byte FIFOs

Rev. 03 — 14 December 2004

Product data

1.

Description

The SC16C752B is a dual universal asynchronous receiver/transmitter (UART) with

64-byte FIFOs, automatic hardware/software ﬂow control, and data rates up to

5 Mbit/s (3.3 V and 5 V). The SC16C752B offers enhanced features. It has a

transmission control register (TCR) that stores receiver FIFO threshold levels to

start/stop transmission during hardware and software ﬂow control. With the FIFO

RDY register, the software gets the status of TXRDY/RXRDY for all four ports in one

access. On-chip status registers provide the user with error indications, operational

status, and modem interface control. System interrupts may be tailored to meet user

requirements. An internal loop-back capability allows on-board diagnostics.

The UART transmits data, sent to it over the peripheral 8-bit bus, on the TX signal and

receives characters on the RX signal. Characters can be programmed to be 5, 6, 7, or

8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be

programmed to interrupt at different trigger levels. The UART generates its own

desired baud rate based upon a programmable divisor and its input clock. It can

transmit even, odd, or no parity and 1, 1.5, or 2 stop bits. The receiver can detect

break, idle, or framing errors, FIFO overﬂow, and parity errors. The transmitter can

detect FIFO underﬂow. The UART also contains a software interface for modem

control operations, and has software ﬂow control and hardware ﬂow control

capabilities.

The SC16C752B is available in plastic LQFP48 and HVQFN32 packages.

2.

Features

s Dual channel

s Pin compatible with SC16C2550 with additional enhancements

s Up to 5 Mbit/s baud rate (at 3.3 V and 5 V; at 2.5 V maximum baud rate is

3 Mbit/s)

s 64-byte transmit FIFO

s 64-byte receive FIFO with error ﬂags

s Programmable and selectable transmit and receive FIFO trigger levels for DMA

and interrupt generation

s Software/hardware ﬂow control

x Programmable Xon/Xoff characters

x Programmable auto-RTS and auto-CTS

s Optional data ﬂow resume by Xon any character

s DMA signalling capability for both received and transmitted data

s Supports 5 V, 3.3 V and 2.5 V operation

s 5 V tolerant inputs

类似零件编号 - SC16C752B

制造商	部件名	数据表	功能描述
NXP Semiconductors	SC16C752B	226Kb / 47P	5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs Rev. 05-2 October 2008
	SC16C752BIB48	226Kb / 47P	5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs Rev. 05-2 October 2008
	SC16C752BIB48	1,019Kb / 47P	5 V, 2.2 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs Rev. 6-30 November 2010
	SC16C752BIBS	226Kb / 47P	5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs Rev. 05-2 October 2008
	SC16C752BIBS	1,019Kb / 47P	5 V, 2.2 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs Rev. 6-30 November 2010

More results

类似说明 - SC16C752B

制造商	部件名	数据表	功能描述
NXP Semiconductors	SC68C752B	236Kb / 49P	5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs and Motorola uP interface Rev. 03-29 November 2005
	SC16C2550B	200Kb / 42P	5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 16-byte FIFOs Rev. 02-14 December 2004
	SC16C754B	259Kb / 50P	5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs Rev. 02-13 June 2005
	SC16C2550B	211Kb / 43P	5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 16-byte FIFOs Rev. 04-15 February 2007
	SC16C752B	226Kb / 47P	5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs Rev. 05-2 October 2008
	SC16C754B	252Kb / 51P	5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs Rev. 04-6 October 2008
	SC16C2550B	221Kb / 43P	5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 16-byte FIFOs Rev. 05-12 January 2009
	SC16C2552B	188Kb / 38P	5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 16-byte FIFOs Rev. 03-12 February 2009
	SC16C752B	1,019Kb / 47P	5 V, 2.2 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs Rev. 6-30 November 2010
	SC16C554BIB80-T	1Mb / 58P	5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs Rev. 4-8 June 2010