STNRGPF01 datasheet(4/40 Pages) STMICROELECTRONICS

4 / 40 page

Description

STNRGPF01

4/40

DocID030377 Rev 2

Description

The STNRGPF01 is a digital controller designed specifically for interleaved PFC boost

topologies and intended for use in high power applications.

The controller is capable of driving up to 3 interleaved channels, generating the proper

signals in each condition. Moreover, it implements a flexible phase shedding strategy that

enables the correct number of PFC channels based on the actual load condition. With this

function, the STNRGPF01 is always able to guarantee the highest power efficiency across a

wide range of load current requirements.

The device works in CCM at fixed frequency with average current mode control, and

implements mixed signal (analog/digital) control. The inner current loop is performed by

hardware, ensuring cycle-by-cycle regulation. The outer voltage loop is performed by a

digital PI controller with fast dynamic response.

The controller implements several functions: inrush current control, soft start-up, burst mode

cooling management and status indicators.

It also features a full set of embedded protections against overvoltage, overcurrent, and

thermal faults.

The STNRGPF01 is configured through a visual dedicated software tool (eDesignSuite) to

match a wide range of specific applications. Using eDesignSuite, the user can customize

the PFC conversion configuration and all the relevant electrical components. As a result, the

tool will automatically generate a full schematic which includes a complete list of material

and the final binary object code (FW) to be downloaded to the STNRGPF01.

STNRGPF01 数据表(PDF) 4 Page - STMicroelectronics