ST72321R6-Auto datasheet(35/243 Pages) STMICROELECTRONICS

35 / 243 page

ST72321xx-Auto

Central processing unit (CPU)

Doc ID 13829 Rev 1

35/243

These two bits are set/cleared by hardware when entering in interrupt. The loaded value is

given by the corresponding bits in the interrupt software priority registers (ISPRx). They can

be also set/cleared by software with the RIM, SIM, IRET, HALT, WFI and PUSH/POP

instructions.

See Chapter 7: Interrupts on page 49 for more details.

5.3.5

Stack pointer (SP) register

Zero

This bit is set and cleared by hardware. This bit indicates that the result of the last

arithmetic, logical or data manipulation is zero.

0: The result of the last operation is different from zero.

1: The result of the last operation is zero.

This bit is accessed by the JREQ and JRNE test instructions.

Carry/borrow

This bit is set and cleared by hardware and software. It indicates an overflow or an

underflow has occurred during the last arithmetic operation.

0: No overflow or underflow has occurred.

1: An overflow or underflow has occurred.

This bit is driven by the SCF and RCF instructions and tested by the JRC and JRNC

instructions. It is also affected by the “bit test and branch”, shift and rotate

instructions.

Table 8.

Interrupt management bits

Bit Name

Function

Interrupt Software Priority 1

The combination of the I1 and I0 bits gives the current interrupt software priority.

Interrupt Software Priority 0

The combination of the I1 and I0 bits gives the current interrupt software priority.

Table 9.

Interrupt software priority selection

Interrupt software priority

Level

Level 0 (main)

Low

High

Level 1

Level 2

Level 3 (= interrupt disable)

Table 7.

Arithmetic management bits (continued)

Bit Name

Function

Reset value: 01 FFh

87654

3210

00000

SP7 SP6 SP5 SP4 SP3 SP2 SP1 SP0

ST72321R6-Auto 数据表(PDF) 35 Page - STMicroelectronics

ST72321R6-Auto 数据表(HTML) 35 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载