| 数据搜索系统,热门电子元器件搜索 |
|
TNETX3150A 数据表(PDF) 33 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TNETX3150A 数据表(HTML) 33 Page - Texas Instruments |
|
33 / 78 page ![]() TNETX15AE ADDRESS-LOOKUP DEVICE SPWS041A – AUGUST 1997 – REVISED OCTOBER 1997 33 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 management delete address interface group at 0x2C, 0x48–0x4F (DIO) BYTE 3 BYTE 2 BYTE 1 BYTE 0 DIO ADDRESS Adddelcontrol 0x2C 0x30 0x34 0x38 0x3C 0x40 0x44 Delnode23–Delnode16 Delnode31–Delnode24 Delnode39–Delnode32 Delnode47–Delnode40 0x48 Delnode7–Delnode0 Delnode15–Delnode8 0x4C The management delete address interface is used with the DEL bits in the adddelcontrol register to perform management deletions from the lookup table. lookup table add/delete command register, adddelcontrol at 0x2C (DIO), byte 0 BYTE 0 BIT 7 6 5 4 3 2 1 0 Reserved ADD DEL Initial values after reset 0 0 0 0 0 0 0 0 BIT NAME FUNCTION 7–2 Reserved Writes to this location are ignored and are read as 0. 1 ADD See the add command-bit description and the description of the addnode registers (0x38–0x3f). 0 DEL Address delete. When DEL is asserted, the TNETX15AE uses the information contained in the management delete address interface to delete an address from the lookup table. DEL remains asserted until the delete process is complete. The adddelcontrol register can be read at any time. If the ADD or DEL bit is being written and that bit is already set, the DIO interface will stall and SRDY will be delayed until the current cycle completes. If neither of these two bits is already set during a write, a normal cycle results. delete-node address register, delnode at 0x48–0x4D (DIO) The delnode registers are used with the DEL bit in the adddelcontrol register to allow for management deletion of an address in the lookup table. To delete an address, the address to be deleted is placed in Ethernet native data format in this register, and the DEL bit in the adddelcontrol register is asserted. This register defaults to 0x00.00.00.00.00.00 after reset. These registers are normally read/write except when the DEL bit in the adddelcontrol register is high; then, writes are ignored. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |