| 数据搜索系统,热门电子元器件搜索 |
|
WM8742GEDS/V 数据表(PDF) 37 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
WM8742GEDS/V 数据表(HTML) 37 Page - Cirrus Logic |
|
37 / 66 page ![]() WM8742 Rev 4.4 37 DIFFERENTIAL MONO MODE DIFF[1:0] sets the required differential output mode; normal stereo, reversed stereo, mono left or mono right, as shown in Table 36. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R8 Mode Control 2 08h [3:2] DIFF[1:0] 00 00 = Stereo 10 = Stereo reverse (left and right channels swapped) 01 = Mono left – differential outputs VOUTLP (17) is left channel. VOUTLN (16) is left channel inverted. VOUTRP (12) is left channel inverted. VOUTRN (13) is left channel. 11 = Mono right – differential outputs. VOUTLP (17) is right channel inverted. VOUTLN (16) is right channel. VOUTRP (12) is right channel. VOUTRN (13) is right channel inverted. Table 36 Differential Output Modes Using these controls a pair of WM8742 devices may be used to build a dual differential stereo implementation with higher performance and differential output. DITHER Dither is applied whenever internal truncation occurs. It is also used when a 32 bit input word is applied to the DAC prior to truncation to the internal wordlength. Three types of dither can be selected to allow the sound quality if the device to be optimised. TDF has a triangular probability density function and causes zero noise modulation i.e. the quantisation noise is invariant to the changes in the signal level. This mode is recommended and is selected by default. RPDF has a rectangular probability density function and may cause noise modulation. HPDF has a triangular probability density function with a high pass characteristic, which has a lower noise at low frequencies at the expense of raised noise levels at higher frequencies. Alternatively the dither can be disabled. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R8 Mode Control 2 08h [1:0] DITHER [1:0] 10 Digital filter dither mode select: 00 = dither off 01 = RPDF dither applied in Digital filter 10 = TPDF dither applied in Digital filter 11 = HPDF dither applied in Digital filter Note: DITHER[1:0] applies only to the dither mode in the Digital filter. Table 37 Dither Control |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |