| 数据搜索系统,热门电子元器件搜索 |
|
24CS512 数据表(PDF) 16 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
24CS512 数据表(HTML) 16 Page - Microchip Technology |
|
16 / 66 page ![]() 24CS512 DS20005769C-page 16 2018-2021 Microchip Technology Inc. 6.2 Page Write A page write operation allows up to 128 bytes to be written in the same write cycle, provided all bytes are in the same physical page of the memory array (where address bits A15 through A7 are the same). Partial page writes of less than 128 bytes are also allowed. A page write is initiated the same way as a byte write, but the host does not send a Stop condition after the first data byte is clocked in. Instead, after the EEPROM acknowledges receipt of the first data byte, the host can transmit up to 127 additional data bytes. The EEPROM will respond with an ACK after each data byte is received. Once all data to be written has been sent to the device, the host must issue a Stop condition (see Figure 6-2). Once the Stop condition is received, an internal write cycle will begin. If an attempt is made to write to a write-protected por- tion of the array, no data will be written and the device will immediately accept a new command. The lower seven bits of the word address are internally incremented following the receipt of each data byte. The higher order address bits are not incremented and retain the memory page location. When the incremented word address reaches the page boundary, the internal Address Pointer will roll over to the beginning of the same page. FIGURE 6-2: PAGE WRITE Note: Page write operations are limited to writing bytes within a single physical page, regardless of the number of bytes actually being written. Physical page boundaries start at addresses that are integer multiples of the page buffer size (or ‘page size’) and end at the addresses that are integer multiples of [page size – 1]. If a page write operation attempts to write across a physi- cal page boundary, the result is that the data wraps around to the beginning of the current page (overwriting data previously stored there), instead of being written to the next page as might be expected. It is there- fore necessary for the application software to prevent page write operations that would attempt to cross a page boundary. SCL SDA MSb MSb MSb MSb MSb MSb 1 2 3 4 56 7 8 9 1 2 3 4 56 78 9 ACK from Client 10 1 0 A2 A1 A0 00 A15 A14 A13 A12 A11 A10 A9 A8 0 ACK from Client Word Address – Byte 0 Device Address Byte 12 3 4 5 6 7 8 912 3 4 5 6 7 8 91 2 3 4 5 6 7 8 9 ACK from Client Word Address – Byte 1 Data Byte (n) Data Byte (n+x), Max. of 128 without Roll Qver A7 A6 A5 A4 A3 A2 A1 A0 D7 D6 D5 D4 D3 D2 D1 D0 00 D7 D6 D5 D4 D3 D2 D1 D0 0 ACK from Client ACK from Client Stop by Host Start by Host |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |