BAV20WS-TP datasheet(32/47 Pages) INFINEON

32 / 47 page

User Manual

32 of 47

Revision 1.4

2020-07-16

EVAL-M3-IM564 User Manual

iMOTION™ Modular Application Design Kit

Hardware description of EVAL-M3-IM564

= +

Thus we get the following formula:

=∆. = −×

According to the test set-up, the test results are shown in Figure 30 below. The IPM case temperature is

detected for about one hour, until the temperature is stable.

Figure 30 Heatsink thermal testing result

Therefore, the final case-to-ambient resistance value is roughly:

=2.4℃/

Please note that thermal resistance is calculated with a fan voltage of 10 V. For higher power capability, fan

input voltage can be increased up to 15 V by U10 (IFX91041EJV, DC-DC voltage regulator), which controls the

fan voltage based on the PFC current sensing op-amp output voltage.

4.4.2

System power output capability

In order to test the total ouput power capability of the MADK system as in Figure 2, the DCB case temperature is

tested with different MADK output power.

Test conditions are: ambient temperature Ta=25 ℃, AC input voltage is VAC=220 V/50Hz, bus voltage is

VDC=380 V, PFC PWM frequency is 50 kHz and inverter frequency is 6 kHz.

Figure 31 MADK ouput power capability test result

BAV20WS-TP 数据表(PDF) 32 Page - Infineon Technologies AG