User Manual

9 of 47

Revision 1.4

2020-07-16

EVAL-M3-IM564 User Manual

iMOTION™ Modular Application Design Kit

Main features of EVAL-M3-IM564

Parameters

Values

Conditions / comments

PFC OCP2

Configured by either PFC current sensing

resistor RS3, or adapting comparator

threshold divider resistor R5/R7 or R4/R8

Inverter OCP1

1

Configured by MCEWizard only, OPA output

Inverter OCP2

Configured by changing shunt resistor RS4 , or

adapting comparator threshold divider

resistor R30/R31 or R19/R29

Inverter OCP3

Configured by changing shunt resistor RS4 , or

threshold divider resistor R40/R41, ITRIP

positive going threshold is about 525 mV

Temperature trip level

100 °C

For controller board EVAL-M3-102T

On board power supply

15 V

15 V ± 5 %, max. 1 A

Used for CIPOS™ IPM gate driver & cooling fan

3.3 V

3.3 V ± 2 %, max. 20 mA

Supplying the 3.3 V to the controller board

and protection circuits

PCB characteristics

Material

FR4, 1.6 mm thickness, 2

layers.

35 µm copper thickness

Dimension

148 mm × 165 mm

System environment

Ambient temperature

25 °C

NA

1

For iMOTION™ IC IMC1xx, there are three types of Gatekill input source (Refer to section 4.2.3, or control board user manual for

details). Please note that if you select comparator for Gatekill input source, the external Gatekill signal will be not used. And the

signal I_Shunt will be compared by the internal comparator with the “Gatekill Comparator Reference” value set in MCEWizard only.