| 数据搜索系统,热门电子元器件搜索 |
|
HVLED007 数据表(PDF) 1 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
HVLED007 数据表(HTML) 1 Page - STMicroelectronics |
|
1 / 33 page ![]() This is information on a product in full production. January 2019 DS12866 Rev 1 1/33 HVLED007 Transition mode PFC controller for flyback converters Datasheet - Production data Features Transition-mode (quasi-resonant) control of flyback PFC pre-regulators Proprietary input current shaper for minimum THD of line current Control input for isolated feedback and optocoupler driving Output overvoltage protection Overload and short-circuit protection Low (≤ 60 μA) start-up current and low (≤ 4 ma) quiescent current Digital leading-edge blanking on current sense -600/+800 mA totem pole gate driver with UVLO pull-down and voltage clamp SO8 package Applications Flyback PFC converters for: AC-DC LED drivers for domestic, commercial and industrial lighting Street lighting EN61000-3-2 compliant SMPS Description The HVLED007 is a current-mode PFC controller specific for isolated high power factor, flyback converters operated in transition mode (aka quasi-resonant operation). Targeting both indoor and outdoor solid-state lighting applications, it provides extended temperature range operation down to -40 °C with guaranteed electrical specification. The main feature of this IC is a special circuit (Input Current Shaper, ICS), that enables High-PF quasi-resonant flyback converters to draw a theoretically sinusoidal input current from the power line, unlike the traditional control. In practice, with little effort it is possible to achieve a total distortion of the input current (THD) lower than 10% at full load and lower than 20% at 30% load over the entire input voltage range. The IC is provided with a control input intended for being driven by the phototransistor of an optocoupler to close a secondary-regulated isolated control loop. However, with the addition of a simple external circuitry it can be used to close a primary-regulated voltage loop as well. The HVLED007 includes protection features to handle overload, short-circuit and overvoltage conditions. The totem-pole output stage, capable of 600 mA source and 800 mA sink current, is suitable for big MOSFET drives which, combined with the other features, makes the device an excellent low-cost solution for EN61000-3-2 compliant SMPS up to 100 W. Table 1. Device summary Order code Package Packaging HVLED007 SO8 Tube HVLED007TR Tape and Reel www.st.com |
类似零件编号 - HVLED007 |
|
类似说明 - HVLED007 |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |