Data Sheet

ADRF5301

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. 0 | 4 of 10

For recommended operating conditions, see Table 1.

Table 3. Absolute Maximum Ratings

Parameter

Rating

Supply Voltage

−0.3 V to +3.6 V

Digital Control Input Voltage

Voltage

−0.3 V to VDD + 0.3 V

Current

3 mA

RF Input Power (VDD = 3.3 V, f = 37 GHz to 40 GHz at

TCASE = 85°C)

Average

28.5 dBm

Peak

36.5 dBm

RF Input Power Under Unbiased Condition (VDD = 0 V)

Average

28 dBm

Peak

36 dBm

Temperature

Junction (TJ)

135°C

Storage

−65°C to +150°C

Reflow

260°C

Stresses at or above those listed under Absolute Maximum Ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

THERMAL RESISTANCE

Thermal performance is directly linked to printed circuit board

(PCB) design and operating environment. Careful attention to PCB

thermal design is required.

θJC is the junction-to-case bottom (channel-to-package bottom)

thermal resistance.

Table 4. Thermal Resistance

Package Type

θJC1

Unit

CC-20-17, Through Path

235

°C/W

1 θJC was determined by simulation under the following conditions: the heat

transfer is due solely to the thermal conduction from the channel through the

ground pad to the PCB, and the ground pad is held constant at the operating

temperature of +85°C.

POWER DERATING CURVE

Figure 2. Power Derating vs. Frequency, TCASE = +85°C

ELECTROSTATIC DISCHARGE (ESD) RATINGS

The following ESD information is provided for handling of ESD-sen-

sitive devices in an ESD protected area only.

Human body model (HBM) ratings are per ANSI/ESDA/JEDEC

JS-001.

Charged device model (CDM) ratings are per ANSI/ESDA/JEDEC

JS-002.

ESD Ratings for ADRF5301

Table 5. ADRF5301, 20-Terminal LGA

ESD Model

Withstand Threshold (V)

HBM

±500 for RF Pins

±2000 for Supply and Digital Control Pins

CDM

±1250 for all Pins

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devi-

ces and circuit boards can discharge without detection. Although

this product features patented or proprietary protection circuitry,

damage may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to avoid

performance degradation or loss of functionality.