| 数据搜索系统,热门电子元器件搜索 |
|
KSZ9563RNXC 数据表(PDF) 172 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
KSZ9563RNXC 数据表(HTML) 172 Page - Microchip Technology |
|
172 / 226 page ![]() KSZ9563R DS00002419D-page 172 2017-2018 Microchip Technology Inc. 5.2.8.3 Port Transmit Queue Control 0 Register This register is indexed. Settings are applied on a per-queue and per-port basis. Specify the target queue number in the Port Transmit Queue Index Register before accessing this register. 5.2.8.4 Port Transmit Queue Control 1 Register This register is indexed. Settings are applied on a per-queue and per-port basis. Specify the target queue number in the Port Transmit Queue Index Register before accessing this register. Address: 0xN914 Port N: 1-3 Size: 8 bits Bits Description Type Default 7:6 Scheduler Mode Determines the egress scheduling policy when 2 or 4 transmit queues are enabled. 00 = Strict Priority. All packets in queue 3 are transmitted before any packets from any lower number queue will be transmitted. All packets in queue 2 are transmitted before any packets from any lower number queue, etc.. 10 = Weighted Round Robin (WRR). As determined by the weight values in the (queue indexed) Port Transmit Queue Control 1 Register, a limited num- ber of packets are transmitted from a queue before the next queue is serviced. All queues are serviced in turn. 01 and 11 = RESERVED R/W 10b 5:4 Shaper Mode Determines the egress traffic shaper used. 00 = No shaping. 01 = Credit based shaper (CBS) as defined in IEEE 802.1Qav for AVB 10 = RESERVED 11 = RESERVED R/W 00b 3:0 RESERVED RO 0000b Address: 0xN915 Port N: 1-3 Size: 8 bits Bits Description Type Default 7 RESERVED RO 0b 6:0 Queue Weight for WRR Scheduling During weighted round robin (WRR) scheduling, this value specifies the num- ber of packets that may be transmitted from the particular queue before the next queue is serviced. These values are not relevant when the port is config- ured for a single egress queue. Do not assign 0 to any queue. Example values for a 4-queue configuration are 8 (for queue 3), 4 (for queue 2), 2 (for queue1) and 1 (for queue 0). R/W 0000001 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |