MP3326

– 16-CHANNEL LED DRIVER WITH I2C AND SEPARATED PDIM/ADIM

MP3326 Rev. 1.0

www.MonolithicPower.com

5

1/4/2021

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2021 MPS. All Rights Reserved.

ABSOLUTE MAXIMUM RATINGS (1)

VIN .................................................-0.3V to +18V

VLED1 to VLED16 ...............................-0.5V to +18V

All other pins ...................................-0.3V to +5V

Junction temperature ................................150°C

Lead temperature .....................................260°C

Storage temperature ................ -65°C to +150°C

Continuous power dissipation (TA = 25°C) (2)

QFN-24 (4mmx4mm) ............................... 2.97W

ESD Ratings

Human body model (HBM) ...........+1.25kV, -2kV

Charged device model (CDM) ................... ±2kV

Recommended Operating Conditions (3)

Supply voltage (VIN) ............................4V to 16V

Operating junction temp (TJ) .... -40°C to +150°C

Thermal Resistance (4)

θJA

θJC

QFN-24 (4mmx4mm)

………...42….....9..…°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature, TJ (MAX), the junction-to-

ambient thermal resistance,

θ

JA, and the ambient temperature,

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX) - TA) / θJA. Exceeding the maximum allowable power

dissipation can cause excessive die temperature, and the

regulator may go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its operating

conditions.

4) Measured on JESD51-7, 4-layer PCB.