| 数据搜索系统,热门电子元器件搜索 |
|
RT9758 数据表(PDF) 11 Page - Richtek Technology Corporation |
|
|
|||||||||||||||||||||||||||||
RT9758 数据表(HTML) 11 Page - Richtek Technology Corporation |
|
11 / 61 page ![]() RT9758 Copyright © 2023 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation. DS9758-03 May 2023 www.richtek.com 11 Parameter Symbol Test Conditions Min Typ Max Unit VOUT_ERR Detect Level tVOUT_ERR VBUS = 5V, in Bypass or DIV2 mode 0.8 1 1.2 V VOUT_ERR Off Time tVOUT_ERR_OFF_TIME Only active in Bypass mode, select by register 0x11[1] = 0, default 36 40 44 ms Only active in Bypass mode, select by register 0x11[1] = 1 72 80 88 CFLY_DIAG Detect Level VCFLY_DIAG Detect CFL pin voltage when CFLY pre-charge is finished in DIV2 mode or reverse DIV2 mode. 0.8 1 1.2 V Thermal Shutdown Threshold TDIE_OTP_TH -- 140 -- °C Thermal Shutdown Hysteresis TDIE_OTP_HYS -- 20 -- °C Thermal Shutdown Deglitch Time tTDIE_DEG Rising/Falling -- 10 -- ms VBUS_LOW_ERR Accuracy VBUS_LOW_ERR_ACC VBUS_LOW_ERR = VBUS/VOUT, falling threshold for device can start reverse DIV2 mode but can't start DIV2 mode. 1.95 1.975 2 V/V VBUS_LOW_ERR = VBUS/VOUT, falling threshold for device can start reverse bypass mode but can't start bypass mode 0.98 0.99 1 VBUS_LOW_ERR Hysteresis VBUS_LOW_ERR_HYS VBUS_LOW_ERR rising hysteresis for device can start DIV2 mode but can't start reverse DIV2 mode. -- -- 0.025 V/V VBUS_LOW_ERR rising hysteresis for device can start bypass mode but can't start reverse bypass mode. -- -- 0.018 VBUS LOW ERR Deglitch tVBUS_LOW_ERR_DEG -- -- 15 s Converter OCP Threshold ICON_OCP_TH fSW = 500kHz, VBUS = 10V 10.8 12 13.2 A Function Threshold and Accuracy VOUT Pre-Charge Current Range IOUT_PRE_CHG_RAN Default = 500mA per phase 330 -- 660 mA VOUT Pre-Charge Current Accuracy IOUT_PRE_CHG_ACC VBUS = 9.5V, in DIV2 single phase mode, PRECHARGE_ CURRENT = 500mA −20 -- 20 % VOUT Pre-Charge Timing tVOUT_PRE_CHG Select by register 0x11[3:2] = 00 -- 0.5 -- ms Select by register 0x11[3:2] = 01 -- 1 -- Select by register 0x11[3:2] = 10, default -- 2 -- Select by register 0x11[3:2] = 11 -- 4 -- |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |