| 数据搜索系统,热门电子元器件搜索 |
|
ST7538Q 数据表(PDF) 20 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST7538Q 数据表(HTML) 20 Page - STMicroelectronics |
|
20 / 44 page ![]() Functional description ST7538Q 20/44 5.5.1 Communication between host and ST7538Q The Host can achieve the Mains access by selecting REG_DATA = ”0” and the choice between Data Transmission or Data Reception is performed by selecting RxTx line (if RxTx =“1” ST7538Q receives data from mains, if RxTx = ”0” ST7538Q transmits data over the mains). Communication between Host and ST7538Q is different in Asynchronous and Synchronous mode: ● Asynchronous mode In Asynchronous Mode, data are exchanged without any data Clock reference. The host controller has to recover the clock reference in receiving Mode and control the Bit time in transmission mode. If RxTx line is set to “1” & REG_DATA = ”0” (Data Reception), ST7538Q enters in an Idle State. After Tcc time the modem starts providing received data on RxD line. If RxTx line is set to “0” & REG_DATA=”0” (Data Transmission), ST7538Q enters in an Idle State and transmission circuitry is switched on. After Tcc time the modem starts transmitting data present on TxD line. ● Synchronous mode In Synchronous Mode ST7538Q is always the master of the communication and provides the clock reference on CLR/T line. When ST7538Q is in receiving mode an internal PLL recovers the clock reference. Data on RxD line are stable on CLR/T rising Edge. When ST7538Q is in transmitting mode the clock reference is internally generated and TxD line is sampled on CLR/T rising Edge. If RxTx line is set to “1” & REG_DATA=”0” (Data Reception), ST7538Q enters in an Idle State and CLR/T line is forced Low. After Tcc time the modem starts providing received data on RxD line. If RxTx line is set to “0” & REG_DATA=”0” (Data Transmission), ST7538Q enters in an Idle State and transmission circuitry is switched on. After Tcc time the modem starts transmitting data present on TxD line (Figure 5) . Figure 4. Receiving and transmitting data/recovered clock timing Transmitting Bit Synchronization CLR/T RxD CLR/T TxD Receiving Bit Synchronization TSTH D03IN1416 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |