Type SE35 + S077

12 | 20

Visit product website 

5.2. Transmitter Type SE35 mounted in an Inline sensor-fitting Type S077

Note:

Dimensions in mm, unless otherwise stated

DN

H

15

126

25

135

40

147

50

157

80

207

100

223

Threaded connection

Flanged connection

DN 15 DN 25 DN 40 DN 50 DN 80

DN 25 DN 40 DN 50 DN 80 DN 100

6.

Product installation

6.1. Installation notes

Note:

The device is not suitable for use in gaseous media and steam.

The sensor fitting can be installed in any orientation as long as the rotor shafts are always in a horizontal plane.

Correct

Incorrect

The following installation conditions must also be observed:

• The pipe always has to be filled with fluid at all times near the device.

• The pipe design must be such that no air bubbles or cavitation can form within the medium near the device at any time.

• We recommend the installation of a 250 µm strainer as close as possible to the inlet side of the meter, to prevent damage from particles,

• Air purges can damage the appliance and should therefore be avoided.