AS7343 datasheet(25/58 Pages) OSRAM

25 / 58 page

Document Feedback

AS7343

Datasheet

• PUBLIC

DS001046

• v6-00 • 2023-Jun-07

│ 24

10.2

Detailed Register Description

For easier readability, the detailed register description is done in groups of registers related to

dedicated device functions. This is not necessarily related to its register address.

Explanation of register access abbreviations:

RW = Read or write

R = Read only

W = Write only

SC = Self-clearing after access

10.2.1

Enable and Configuration Registers

The following registers are needed to power up and configure the device. To operate the device set bit

PON = “1” first (register 0x80) after that configure the device and enable interrupts before setting

SP_EN

= “1”. Changing configuration while SP_EN = “1” may result in invalid results.

ENABLE Register (Address 0x80)

Figure 21:

ENABLE Register

Addr: 0x80

ENABLE

Bit

Bit Name

Default

Access

Bit Description

Reserved

FDEN

Flicker Detection Enable.

0: Flicker Detection disabled

1: Flicker Detection enabled

Reserved

SMUXEN

SMUX Enable.

1: Starts SMUX command

Note: This bit gets cleared automatically as soon as

SMUX operation is finished

WEN

Wait Enable.

0: Wait time between two consecutive spectral

measurements disabled

1: Wait time between two consecutive spectral

measurements enabled

Reserved

SP_EN

Spectral Measurement Enable.

0: Spectral Measurement Disabled

1: Spectral Measurement Enabled

AS7343 数据表(PDF) 25 Page - OSRAM GmbH

AS7343 数据表(HTML) 25 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

数据表下载

链接网址

AS7343 数据表(PDF) 25 Page - OSRAM GmbH

AS7343 数据表(HTML) 25 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

数据表 下载

链接网址

数据表下载