| 数据搜索系统,热门电子元器件搜索 |
|
LT3074AVPBF 数据表(PDF) 53 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
LT3074AVPBF 数据表(HTML) 53 Page - Analog Devices |
|
53 / 62 page ![]() Data Sheet LT3074 analog.com Rev 0. 53 of 62 STATUS_MFR_SPECIFIC The STATUS_MFR_SPECIFIC command returns a one-byte summary of warnings specific to the LT3074. Table 22. STATUS_MFR_SPECIFIC Bit Field Descriptions Bit Access Mode Bit Name Description 7 Read Only Unused Returns 0 6 Read/Write 1 to Clear VBIAS_OV_WARNING A bias overvoltage warning (as set by the MFR_BIAS_OV_WARN_LIMIT) occurred. 5 Read/Write 1 to Clear VBIAS_UV_WARNING A bias undervoltage warning (as set by the MFR_BIAS_UV_WARN_LIMIT) occurred. 4 Read/Write 1 to Clear IOUT_MIN_WARNING A minimum output current warning (as set by the MFR_IOUT_MIN_WARN_LIMIT) occurred. 3 Read/Write 1 to Clear FAST_START A fast start-up event (post initial power on) occurred. 2:0 Read Only Unused Returns 3’b000 This command has one data byte. READ_VIN The READ_VIN command returns the measured IN pin voltage, in Volts. This read-only command has two data bytes formatted in the Linear_5s_11s format. READ_VOUT The READ_VOUT command returns the measured SENSE pin voltage, in Volts. This read-only command has two data bytes formatted in the Linear_16u format. READ_IOUT The READ_IOUT command returns the measured output current, in Amperes. This read-only command has two data bytes formatted in the Linear_5s_11s format. READ_TEMPERATURE_1 The READ_TEMPERATURE_1 command returns the measured average die temperature, in degree Celsius. This read- only command has two data bytes formatted in the Linear_5s_11s format. PMBUS_REVISION The PMBUS_REVISION command returns the revision of PMBus specification that the device supports. The LT3074 is compliant with the PMBus version 1.3, both part I and part II. This read-only command has one data byte. IC_DEVICE_ID The IC_DEVICE_ID command indicates the manufacturer’s ID of the LT3074 using ASCII characters. This read-only command is in block format. IC_DEVICE_REV The IC_DEVICE_REV command indicates the revision of the LT3074 using ASCII characters. This read-only command is in block format. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |