| 数据搜索系统,热门电子元器件搜索 |
|
ADBMS1818CSWAZ-R7 数据表(PDF) 51 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADBMS1818CSWAZ-R7 数据表(HTML) 51 Page - Analog Devices |
|
51 / 92 page ![]() Data Sheet ADBMS1818 THEORY OF OPERATION analog.com Rev. B | 51 of 92 Using a Single ADBMS1818 When only one ADBMS1818 is needed, the device can be used as a single (non daisy-chained) device if the second isoSPI port (Port B) is properly biased and terminated, as shown in Figure 81 and Figure 82. ICMP must not be tied to GND but can be tied directly to IBIAS. A bias resistance (2 kΩ to 20 kΩ) is required for IBIAS. Do not tie IBIAS directly to VREG or V–. Finally, IPB and IMB must be terminated into a 100 Ω resistor (not tied to VREG or V–). Figure 81. Single Device Using 2-Wire Port A Figure 82. Single Device Using 4-Wire Port A |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |