 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
AX88796BLF 数据表(PDF) 56 Page - ASIX Electronics Corporation |
|
|
|||||||||||||||||||||||||||||
AX88796BLF 数据表(HTML) 56 Page - ASIX Electronics Corporation |
|
|
56 / 82 page  ASIX ELECTRONICS CORPORATION 56 AX88796BLF / AX88796BLI 5.2.3 MR2 -- Identification 1 Registers Field Type Description (Default = 003Bh) 2.15:0 (OUI[3:18]) RO Organizationally Unique Identifier. The third through the twenty-fourth bit of the OUI assigned to the PHY manufacturer by the IEEE are to be placed in bits. 2.15:0 and 3.15:10. 5.2.3 MR3 – Identification 2 Registers Field Type Description (Default = 1841h) 3.15:10 (OUI[19:24]) RO Organizationally Unique Identifier. The remaining 6 bits of the OUI. 3.9:4 (MODEL[5:0]) RO Model Number. 6-bit model number of the device. 3.3:0 (VERSION[3:0]) RO Revision Number. The value of the present revision number 5.2.4 MR4 – Autonegotiation Advertisement Register Field Type Description (Default = 01E1h) 4.15 (NEXT_PAGE) 0, RO / PS Next Page. 0 = No next page available AX88796B does not support the next page function. 4.14 (ACK) 0, RO Acknowledge. 1 = Link partner ability data reception acknowledged 0 = Not acknowledged 4.13 (REM_FAULT) 0, RW Remote Fault. 1= Fault condition detected and advertised 0 = No fault detected 4.12:11 (RESERVED) X, RW Reserved. Write as 0, read as “don’t care” 4.10 (PAUSE) 0, RW Pause. 1 = Pause operation is enabled for full-duplex links 0 = Pause operation is not enabled 4.9 (100BASET4) 0, RO / PS 100Base-T4. 0 = 100BASE-T4 is not supported 4.8 (100BASET_FD) 1, RW 100Base-TX Full Duplex. 1 = 100BASE-TX full-duplex is supported by this device 0 = 100BASE-TX full-duplex is not supported by this device 4.7 (100BASETX) 1, RW 100Base-TX Half Duplex. 1 = 100BASE-TX half-duplex is supported by this device 0 = 100BASE-TX half-duplex is not supported by this device 4.6 (10BASET_FD) R/W 10Base-T Full Duplex. 1 = 10BASE-T full-duplex is supported by this PHY 0 = 10BASE-T full-duplex is not supported by this PHY 4.5 (10BASET) R/W 10Base-T Half Duplex. 1 = 10BASE-T half-duplex is supported by this PHY 0 = 10BASE-T half-duplex is not supported by this PHY 4.4:0 (SELECT) [0 0001], RW Selector Field. Reset with the value 00001 for IEEE 802.3. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
