| 数据搜索系统,热门电子元器件搜索 |
|
CBLUSB01 数据表(PDF) 16 Page - Red Lion Controls. Inc |
|
|
|||||||||||||||||||||||||||||
CBLUSB01 数据表(HTML) 16 Page - Red Lion Controls. Inc |
|
16 / 36 page ![]() 16 16 6.1 mOdUle 1 - signal inpUT parameTers () PAXH INPUT RANGE PAXH INPUT COUPLE Select the input range that corresponds to the external signal. This selection should be high enough to avoid input signal overload but low enough for the desired input resolution. This selection and the position of the Input Range Jumper must match. The input signal can be either AC coupled (rejecting the DC components of the signal) or DC coupled (measures both the AC and DC components of the signal). The coupling jumper and the setting of this parameter must match. or SELECTION RANGE RESOLUTION 5.000 A 200.00 mA 20.000 mA 2.0000 mA 200.00 µA RANGE RESOLUTION SELECTION 300.0 V 20.000 V 2.0000 V 200.00 mV 1-INP Display Decimal Point dECPt Input Range rAN6E Display Rounding round Scaling Style StYLE FILtr Filter Setting bANd Filter Band Scaling Points PtS Display x Value dSP Input x Value INP xx PAR Pro COUPL Input Couple PAXH ONLY 1-INP Temperature Scale dECPt Input Type tYPE Display Rounding round Scaling Points PtS OFFSt Display Offset bANd Filter Band Ice Point Slope ICE Display x Value dSP Input x Value INP xx PAR Pro Custom Scaling Only SCALE Display Decimal Point FILtr Filter Setting PAX PARAMETER MENU PAXT PARAMETER MENU PAXD INPUT RANGE Select the input range that corresponds to the external signal. This selection should be high enough to avoid input signal overload but low enough for the desired input resolution. This selection and the position of the Input Range Jumper must match. 10000 ohm 1000.0 ohm ±200.00 mV ±2.0000 A SELECTION RANGE RESOLUTION RANGE RESOLUTION SELECTION 100.00 ohm ±300.00 V ±200.00 mA ±20.000 V ±2.0000 V ±20.000 mA ±2.0000 mA ±200.00 µA Refer to the appropriate Input Range for the selected meter. Use only one Input Range, then proceed to Display Decimal Point. PAXP INPUT RANGE Select the input range that corresponds to the external signal. 10.000 V 20.000 mA RANGE RESOLUTION SELECTION PAXS INPUT RANGE Select the input range that corresponds to the external signal. This selection should be high enough to avoid input signal overload but low enough for the desired input resolution. This selection and the position of the Input Range Jumper must match. RANGE RESOLUTION SELECTION ±24 mV ±240 mV PAXT INPUT TYPE Select the input type that corresponds to the input sensor. For RTD types, check the RTD Input Jumper for matching selection. For custom types, the Temperature Scale parameter is not available, the Display Decimal Point is expanded, and Custom Sensor Scaling must be completed. Custom RTD Low Custom RTD High N TC B TC Custom TC RTD copper 10 Ω S TC R TC SELECTION TYPE TYPE SELECTION RTD nickel 672 RTD platinum 392 K TC RTD platinum 385 C TC J TC E TC T TC PAXT TEMPERATURE SCALE Select the temperature scale. This selection applies for Input, MAX, MIN, and TOT displays. This does not change the user installed Custom Units Overlay display. If changed, those parameters that relate to the temperature scale should be checked. This selection is not available for custom sensor types. DISPLAY DECIMAL POINT Select the decimal point location for the Input, MAX and MIN displays. (The TOT display decimal point is a separate parameter.) This selection also affects , and parameters and setpoint values. For the PAXT, these are only available with Custom Scaling. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |