5 Pin Configuration and Functions

TLV704

IN

NC

GND

OUT

NC

Figure 5-1. DBV Package, 5-Pin SOT-23 (Top View)

Table 5-1. Pin Functions

PIN

TYPE

DESCRIPTION

NAME

DBV

GND

1

—

Ground pin.

IN

2

I

Input supply pin. A capacitor with a value of 0.1 µF or larger is recommended from this pin

to ground. See the Input and Output Capacitor Requirements section for more information.

OUT

3

O

Output of the regulator. A capacitor with a value of 1 µF or larger is required from this pin to

ground.(1) See the Input and Output Capacitor Requirements section for more information.

NC

4, 5

—

Not internally connected. This pin can be left open or tied to ground for improved thermal

performance.

(1)

The nominal output capacitance must be greater than 0.47 µF. Throughout this document, the nominal derating on these capacitors is

50%. Make sure that the effective capacitance at the pin is greater than 0.47 µF.

www.ti.com

TLV704

SBVS148F – SEPTEMBER 2010 – REVISED MARCH 2023

Copyright © 2023 Texas Instruments Incorporated

Submit Document Feedback

3

Product Folder Links: TLV704