Specifications

This chapter contains specifications for the instrument. All specifications are typical unless noted as guaranteed. Typical specifications are provided

for your convenience but are not guaranteed. Specifications that are marked with the

symbol are guaranteed and checked in Performance

Verification.

To meet specifications, these conditions must first be met:

• The instrument must have been calibrated in an ambient temperature between 18 °C and 28 °C (64 °F and 82 °F).

• The instrument must be operating within the environmental limits. (See Environmental characteristics).

• The instrument must be powered from a source that meets the specifications. (See Power supply system).

• The instrument must have been operating continuously for at least 20 minutes within the specified operating temperature range.

• You must perform the Signal path compensation procedure after the warmup period. See the Signal path compensation procedure for how to

perform signal path compensation. If the ambient temperature changes more than 5 °C (9 °F), repeat the procedure.

All specifications are typical unless noted otherwise. All specifications apply to all models unless noted otherwise.

Model overview

MSO22

MSO24

Analog channels

2

4

Analog channel bandwidth1

70 MHz, 100 MHz, 200 MHz, 350 MHz, and 500 MHz

Sample rate

1.25 GS/s All channel, 2.5 GS/s half channels Interleaved

Record length

10 M

Digital channels

16

AFG outputs

1 (multiplexed with Aux Out)

Vertical system analog channels

Bandwidth limits

(limited by instrument bw)

20 MHz, 70 MHz, 100 MHz, 200 MHz, 350 MHz, and 500 MHz

Input coupling

AC, DC

Input impedance

BNC

1 MΩ ± 1%, 14 pF ± 3 pF

TPP0200 probe tip

10 MΩ, < 12 pF

P6139B probe tip

10 MΩ, < 8 pF

Input sensitivity range

1 mV/div to 10 V/div

Vertical resolution

8 Bit

1

500 MHz bandwidth guaranteed from 4 mV/div to 10 V/div.

2 Series MSO Datasheet

www.tek.com 14