TDA7590 datasheet(6/40 Pages) STMICROELECTRONICS

6 / 40 page

Pin description

TDA7590

6/40

2.2

Pin function

Table 1.

Pin function

N°

Name

Type

Description

SRD1/TI02

I/O

Serial Receive Data. Serial input data for receiver. Timer 2 input/output.

STD1

I/O

Serial Transmit Data. Serial output data from transmitter.

3SC02

I/O

Serial Control 2.Transmitter frame sync only in asynchronous mode,

transmitter and receiver frame sync in synchronous mode.

4SC01

I/O

Serial Control 1. Receive frame sync in asynchronous mode, output

from transmitter 2 or serial flag 1 in synchronous mode.

5DE_N

I/O

Test Data Output(Input/Output). Debug Request input and Acknowledge

output.

6NMI_N

Non-maskable interrupt/ PINIT. Used to enable the PLL during RESET

and as a non-maskable interrupt at all other times.

SRD0

I/O

Serial Receive Data. Serial input data for receiver.

IOVDD

IO Power Supply.

IOVSS

IO Ground.

STD0

I/O

Serial Transmit Data. Serial output data from transmitter.

SC10/SCL

I/O

ESSI1 Serial Control 0. Receive clock in asynchronous mode, output from

transmitter or serial flag in synchronous mode.

I2C SCL. Serial Clock Line.

SC00

I/O

Serial Control 0. Receive clock in asynchronous mode, output from

transmitter 1 or serial flag 0 in synchronous mode.

RXD

I/O

SCI Receive Data. Receives byte-oriented serial data.

TXD

I/O

SCI Read Enable. Transmits serial data from SCI transmit shift register.

SCLK

I/O

SCI Serial Clock. Input or ouput clock from which data is transferred in

synchronous mode and from which the transmit and/or receive baud rate is

derived in asynchronous mode.

SCK1/TI01

I/O

Serial Clock. Serial bit clock for transmitter only in asynchronous mode, serial

bit clock for both receiver and transmitter in synchronous mode.

Timer 1 input/output.

SCK0

I/O

Serial Clock. Serial bit clock for transmitter only in asynchronous mode, serial

bit clock for both receiver and transmitter in synchronous mode.

RESETN

System Reset. A low level applied to RESET_N input initializes the IC.

SCANEN

SCAN Enable. When active with TESTEN also active, controls the shifting of

the internal scan chains.

TESTEN

Test Enable. When active, puts the chip into test mode and muxes the XTI

clock to all flip-flops. When SCANEN is also active, the scan chain shifting is

enabled.

COREVSS

Core Ground.

COREVDD

Core Power Supply.

TIO0

I/O

Timer 0 input/output.

TDA7590 数据表(PDF) 6 Page - STMicroelectronics

TDA7590 数据表(HTML) 6 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

数据表下载