ST7262 datasheet(46/132 Pages) STMICROELECTRONICS

部件名	ST7262

功能描述	LOW SPEED USB 8-BIT MCU WITH 3 ENDPOINTS, FLASH OR ROM MEMORY, LVD, WDG, 10-BIT ADC, 2 TIMERS, SCI, SPI

PDF	132 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

46 / 132 page

ST7262

46/132

PWM AUTO-RELOAD TIMER (Cont’d)

Output compare and Time base interrupt

On overflow, the OVF flag of the ARTCSR register

is set and an overflow interrupt request is generat-

ed if the overflow interrupt enable bit, OIE, in the

ARTCSR register, is set. The OVF flag must be re-

set by the user software. This interrupt can be

used as a time base in the application.

External clock and event detector mode

Using the fEXT external prescaler input clock, the

auto-reload timer can be used as an external clock

event detector. In this mode, the ARTARR register

is used to select the nEVENT number of events to

be counted before setting the OVF flag.

nEVENT = 256 - ARTARR

When entering HALT mode while fEXT is selected,

all the timer control registers are frozen but the

counter continues to increment. If the OIE bit is

set, the next overflow of the counter will generate

an interrupt which wakes up the MCU.

Figure 35. External Event Detector Example (3 counts)

COUNTER

FDh

FEh

FFh

FDh

OVF

ARTCSR READ

INTERRUPT

ARTARR=FDh

fEXT=fCOUNTER

FEh

FFh

FDh

IF OIE=1

INTERRUPT

IF OIE=1

ARTCSR READ

ST7262 数据表(PDF) 46 Page - STMicroelectronics

ST7262 数据表(HTML) 46 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载