| 数据搜索系统,热门电子元器件搜索 |
|
ADE3800SXT 数据表(PDF) 88 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ADE3800SXT 数据表(HTML) 88 Page - STMicroelectronics |
|
88 / 138 page ![]() Register Description by Block ADE3800 88/138 4.15 Flicker (FLK) The Flicker block computes a nonlinear correlation of LCD polarity inversion patterns and the LCD output data stream and provides the correlation results as scores to the microcontroller via I2C. The MCU polls this block regularly. In response to a high score, the MCU can adjust the polarity signal generated in the TCON to cancel the visual flicker that arises from correlated pixel and polarity patterns. Figure 16 shows a block diagram of the flicker module and its connectivity with the neighboring modules. 4.15.1 Function A Walsh 8x8 function is used to compare the detected pattern, where each one of the 8 functions represents a pattern. All patterns are considered to be vertically, where horizontally the pixels are assumed to be alternating its RGB components. Only 4 of the patterns can be measured at one time, and they are selected by means of WF_SHIFT[2:0] by programming the number of patterns shifted i.e. ● if WF_SHIFT = 00 then the 4 results are meas0, meas1, meas2, meas3; ● if WF_SHIFT = 01 then the 4 results are meas1, meas2, meas3, meas4; ● if WF_SHIFT = 05 then the 4 results are meas5, meas6, meas7, meas0; and so on. The score that is registered at the end of a measurement is the delta intensity between the RGB components on pixels that are alternating horizontally and match one or more of the defined 8 patterns. Since the flickering effect occurs most of the time around the 50% of the color intensity, two functions are used to get the delta difference between the RGB components, one is normalized at 50%, and the other is normalized at 100%. The selection between the two can be programmed by the FLICKER_CTRL0[5] => 0/1 (100/50%) normalization. The horizontal setting of the RGB component of each pixel is represented by the FLICKER_CTRL0[2:0], and for any pattern, maximum scores are calculated by having the correct Figure 16: Block Diagram 10 bit APC TCON Flicker Detector TFT Panel OSD Gamma Output Formatter EMI |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |