 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
HD6417618 数据表(PDF) 501 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD6417618 数据表(HTML) 501 Page - Renesas Technology Corp |
|
|
501 / 646 page  Section 17 I/O Ports Rev. 6.00 Jun. 12, 2007 Page 469 of 610 REJ09B0131-0600 17.6 Usage Note 1. When pins multiplexed with general I/O is used as output pins for other functions, these pins work as general output pins for the period of 1 × t PCYC synchronized with internal power-on reset by WDT overflow. For example, when the pin PB12/ CS3 works as CS3 and the PB12DR bit in PBDRL is set to 0, the pin is driven low for the period of 1 × t PCYC and may cause memory malfunction. To prevent this, port registers that correspond to pins used for the strobe output must be set to strobe non-active level. This does not apply to the power-on reset from the RES pin. 2. Since the HIFMD pin is not initially set to function as a general port pin, it must be pulled up or down externally to fix its state. 3. When using a multiplexed pin with a function not selected with its initial value (for example, using the PB12/ CS3 pin, the initial function of which is PB12, as the CS3 pin), the pin must be pulled up or down externally at least after a reset until its pin function is selected by software to fix its state. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
