Preliminary data

This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to

change without notice.

February 2010

Doc ID 16089 Rev 3

1/48

48

SPBT2532C2.AT

Features

– ACL: DM1, DM3, DM5, DH1, DH3, DH5, 2-

DH1, 2-DH3, 2-DH5

coexistence in collocated scenario

– Fast UART up to 3.25 Mbit/s

– SPI interface

– 4 general purpose I/O

– 4 x 12-bit A/D input

– AT command set

– 256 Kbytes Flash memory

– 48 Kbytes RAM memory

Description

The SPBT2532C2.AT is a surface-mount PCB

module that provides fully embedded,

ready-to-use Bluetooth wireless technology. It is

designed for maximum performance in a minimal

and up to 2 Mbps data throughput.

The re-programmable Flash memory contains

embedded firmware for serial cable replacement

using the Bluetooth SPP profile.

a.

All these resources cannot coexist at the same time;

they are shared on the 8 pins available for interface.

Standard configuration for AT command set is 4 pins

for UART and 4 pins for GPIO.

www.st.com