SPBT2532C2AT datasheet(37/48 Pages) STMICROELECTRONICS

37 / 48 page

SPBT2532C2.AT

Commands

Doc ID 16089 Rev 3

37/48

C.31

StreamingSerial

C.31.1

Syntax

AT+AB StreamingSerial [Enable/Disable]

Where

[Enable/Disable] is an e or E character to enable this parameter and a d or D

character to disable it.

C.31.2

Query

An alternative syntax may be used to query the current StreamingSerial feature status. This

syntax is not supported by other commands.

AT+AB StreamingSerial

C.31.3

Responses

If the feature is successfully applied or queried, the response is:

AT-AB StreamingSerial [Enabled/Disabled]

C.32

UpdateInquiryScan

The UpdateInquiryScan command is used to modify the Inquiry scan parameters: mode,

duration, and interval.

C.32.1

Syntax

AT+AB UpdateInquiryScan [mode] [duration] [interval]

where

[mode] is the discoverable mode:

●

0: non-discoverable

●

1: limited discoverability – not supported

●

2: discoverable

[duration] is the scan length in slots; 18 to 4096. The default duration is 18 slots.

[interval] is the period between scans in slots; 18 to 4096. The default interval is 2048

slots

C.32.2

Responses

If the command is successful, the response is:

AT-AB InquiryScanUpdateDone

SPBT2532C2AT 数据表(PDF) 37 Page - STMicroelectronics

SPBT2532C2AT 数据表(HTML) 37 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

数据表下载