LTC4100 datasheet(21/48 Pages) LINER

21 / 48 page

LTC1760

1760fa

2.3.7 Current() (0

×0A)

Description:

This function is used by the LTC1760 to read the actual

current being supplied through the battery terminals.

Purpose:

Allows the LTC1760 to determine how much current a

battery is receiving through its terminals and close the

charging current servo loop.

SMBus Protocol: Read Word. LTC1760 reads Battery 1 or

Battery 2 as an SMBus Master.

Output: signed integer (2’s complement) — charge/dis-

charge rate in mA increments - positive for charge, nega-

tive for discharge. Refer to “Section 2.2” for bit mapping.

Units: mA.

Range: 0 to 32,767 mA for charge or 0 to -32,768 mA

for discharge.

2.3.8 ChargingCurrent() (0

×14)

Description:

This function is used by the LTC1760 to read the Smart

Battery’s desired charging current.

Purpose:

Allows the LTC1760 to determine the maximum charging

current.

SMBus Protocol: Read Word. LTC1760 reads Battery 1 or

Battery 2 as an SMBus Master.

Output: unsigned integer — maximum charger output

current in mA. Refer to “Section 2.2” for bit mapping.

Units: mA.

Range: 0 to 65,534 mA.

2.3.9 ChargingVoltage() (0

×15)

Description:

This function is used by the LTC1760 to read the Smart

Battery’s desired charging voltage.

Purpose:

Allows the LTC1760 to determine the maximum charging

voltage.

SMBus Protocol: Read Word. LTC1760 reads Battery 1 or

Battery 2 as an SMBus Master.

Output: unsigned integer — charger output voltage in mV.

Refer to “Section 2.2” for bit mapping.

Units: mV.

Range: 0 to 65,534 mV.

2.3.10 AlarmWarning() (0

×16)

Description:

This function is used by the LTC1760 to read the Smart

Battery’s Alarm register.

Purpose:

Allows the LTC1760 to determine the state of all applicable

alarm flags.

SMBus Protocol: Read Word. LTC1760 reads Battery 1 or

Battery 2 as an SMBus Master.

Output: unsigned integer – Refer to “Section 2.2” for bit

mapping.

OVER_CHARGED_ALARM Bit

The read only OVER_CHARGED_ALARM bit is used by the

LTC1760 to determine if charging may continue.

Allowed values are:

1b: The LTC1760 will not charge this battery.

0b: The LTC1760 may charge this battery if other

conditions permit charging.

TERMINATE_CHARGE_ALARM Bit

The read only TERMINATE_CHARGE_ALARM bit is used

by the LTC1760 to determine if charging may continue.

Allowed values are:

1b: The LTC1760 will not charge this battery.

0b: The LTC1760 may charge this battery if other

conditions permit charging.

OPERATION

LTC4100 数据表(PDF) 21 Page - Linear Technology

LTC4100 数据表(HTML) 21 Page - Linear Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

数据表下载

链接网址

LTC4100 数据表(PDF) 21 Page - Linear Technology

LTC4100 数据表(HTML) 21 Page - Linear Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

数据表 下载

链接网址

数据表下载