L6360 datasheet(1/65 Pages) STMICROELECTRONICS

部件名	L6360

功能描述	IO-Link communication master transceiver IC

PDF	65 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

1 / 65 page

This is information on a product in full production.

March 2012

Doc ID 022817 Rev 2

1/65

65

L6360

IO-Link communication master transceiver IC

Datasheet

−production data

Features

■ Supply voltage from 18 to 32.5 V

■ Programmable output stages: high-side,

low-side or push-pull (< 2

Ω)

■ Up to 500 mA L+ protected high-side driver

■ Supports COM1, COM2 and COM3 mode

■ Additional IEC61131-2 type-1 input

■ Short-circuit and overcurrent output protection

through current limitation and programmable

cutoff current

■ 3.3 V / 5 V, 50 mA linear regulator

■ 5 mA IO-Link digital input

■ Fast mode I2C for IC control, configuration and

diagnostic

■ Diagnostic dual LED sequence generator and

driver

■ 5 V and 3.3 V compatible I/Os

■ Overvoltage protection (> 36 V)

■ Overtemperature protection

■ ESD protection

■ Miniaturized: VFQFPN-26L

3.5 x 5 x 1 mm package

Applications

■ Industrial sensors

■ Factory automation

■ Process control

Description

The L6360 is a monolithic IO-Link master port

compliant with PHY2 (3 wires) supporting COM1

(4.8 kbaud), COM2 (38.4 kbaud) and COM3

(230.4 kbaud) modes.

The C/QO output stage is programmable: high-

side, low-side or push-pull; also cutoff current,

cutoff current delay time, and restart delay are

programmable.

Cutoff current and cutoff current delay time,

combined with thermal shutdown and automatic

restart protect the device against overload and

short-circuit.

C/QO and L+ output stages are able to drive

resistive, inductive and capacitive loads. Inductive

loads up to 10 mJ can be driven.

Supply voltage is monitored and low voltage

conditions are detected.

The L6360 transfers, through the PHY2(C/QO

pin), data received from a host microcontroller

through the USART (IN C/QO pin), or to the

USART (OUT C/QI pin) data received from PHY2

(C/QI pin).

To enable full IC control, configuration and

monitoring (i.e. fault conditions stored in the

status register), the communication between the

system microcontroller and the L6360 is based on

a Fast mode 2-wire I2C.

The L6360 has nine registers to manage the

programmable parameters and the status of the

IC.

Monitored fault conditions are: L+ line,

overtemperature, C/Q overload, linear regulator

undervoltage, and parity check.

Internal LED driver circuitries, in open drain

configuration, provide two programmable

sequences to drive two LEDs.

VFQFPN-26L 3.5 x 5 x 1 mm

www.st.com

类似零件编号 - L6360

制造商	部件名	数据表	功能描述
STMicroelectronics	L6360	627Kb / 4P	STM32 Nucleo pack for IO-Link master with IO-Link v1.1 PHY and stack 04-Jul-2018

More results

类似说明 - L6360

制造商	部件名	数据表	功能描述
Maxim Integrated Produc...	MAX14824	2Mb / 28P	IO-Link Master Transceiver Rev 3; 5/12
STMicroelectronics	AN4075	415Kb / 23P	STEVAL-IFP016V2 IO-Link communication master transceiver 25-Apr-2012
STMicroelectronics	L6362A	1Mb / 37P	IO-Link communication transceiver device IC 03-Feb-2016
Festo Corporation.	8086604	89Kb / 2P	IO-Link Master
WAGO Kontakttechnik Gmb...	750-657	555Kb / 13P	IO-Link Master
Pepperl+Fuchs Inc.	ICE1-8IOL-G30L-V1D	857Kb / 4P	IO-Link master
Pepperl+Fuchs Inc.	ICE1-8IOL-G60L-V1D	969Kb / 4P	IO-Link master
Maxim Integrated Produc...	MAX14824EVKIT	1Mb / 12P	IO-Link-Compliant Master Transceiver Rev 2; 1/13
Pepperl+Fuchs Inc.	IO-LINK-MASTER02-USB	715Kb / 4P	IO-Link Master 2020-06-30
NXP Semiconductors	CM3120	1Mb / 38P	IO-link master transceiver Rev. 1.0, 7/2016