CS5490 datasheet(21/56 Pages) APEX

21 / 56 page

CS5490

DS982F2

The CS5490 pulse generation block behaves as

follows:

• The pulse rate generated by full-scale (1.0 decimal)

power register is

FOUT =(PulseRate x 2000)/2FREQ_RNG

•The PulseRate register value is

PulseRate = (FOUT x2FREQ_RNG)/2000

= (18.5186 x 64)/2000

= 0.5925952

= 0x4BDA29

5.5.2 Pulse Width

The PulseWidth register defines the Active-low time of

each energy pulse:

Active-low = 250µs + (PulseWidth/64000).

By default, the PulseWidth register value is 1, and the

Active-low time of each energy pulse is 265.6µs. Note

that the pulse width should never exceed the pulse

period.

5.6 Voltage Sag, Voltage Swell, and

Overcurrent Detection

Voltage sag detection is used to determine when the

voltage falls below a predetermined level for a specified

interval of time (duration). Voltage swell and overcurrent

detection determine when the voltage or current rises

above a predetermined level for the duration.

The duration is set by the value in the VSagDUR,

VSwellDUR, and IOverDUR registers. Setting any of

these to zero (default) disables the detect feature for the

given channel. The value is in output word rate (OWR)

samples. The predetermined level is set by the values

in the VSagLEVEL, VSwellLEVEL, and IOverLEVEL

registers.

For each enabled input channel, the measured value is

rectified and compared to the associated level register.

Over the duration window, the number of samples above

and below the level are counted. If the number of

samples below the level exceeds the number of samples

above, a Status0 register bit VSAG is set, indicating a

sag condition. If the number of samples above the level

exceeds the number of samples below, a Status0

or overcurrent condition (see Figure 11).

Lev e l

Du ra tio n

Figure 11. Sag, Swell, & Overcurrent Detect

CS5490 数据表(PDF) 21 Page - Cirrus Logic

CS5490 数据表(HTML) 21 Page - Cirrus Logic

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

数据表下载