 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
ADP5586ACBZ-00-R7 数据表(PDF) 33 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADP5586ACBZ-00-R7 数据表(HTML) 33 Page - Analog Devices |
|
|
33 / 44 page  Data Sheet ADP5586 Rev. 0 | Page 33 of 44 GPIO_INP_EN_B, Register 0x2A Table 51. GPIO_INP_EN_B Bit Descriptions Bits Bit Name Access Description [7:5] Reserved Reserved Reserved. 4 GPIO_11_INP_EN Read/write 0 = GPIO 11 input disabled. 1 = GPIO 11 input enabled. 3 GPIO_10_INP_EN Read/write 0 = GPIO 10 input disabled. 1 = GPIO 10 input enabled. 2 GPIO_9_INP_EN Read/write 0 = GPIO 9 input disabled. 1 = GPIO 9 input enabled. 1 GPIO_8_INP_EN Read/write 0 = GPIO 8 input disabled. 1 = GPIO 8 input enabled. 0 GPIO_7_INP_EN Read/write 0 = GPIO 7 input disabled. 1 = GPIO 7 input enabled. RESET_EVENT_A, Register 0x2B Table 52. RESET_EVENT_A Bit Descriptions Bits Bit Name Access Description 7 RESET_EVENT_A_LEVEL Read/write Defines which level the first reset event should be to generate the RESET_OUT signal. For key events, use the following settings: 0 = inactive event used as a reset condition. 1 = active event used as a reset condition. For GPIs and logic outputs configured for FIFO updates, use the following settings: 0 = not applicable; releases not used for reset generation. 1 = press is used as a reset event. [6:0] RESET_EVENT_A[6:0] Read/write Defines an event that can be used to generate the RESET_OUT signal. Up to three events can be defined for generating the RESET_OUT signal, using RESET_EVENT_A[6:0], RESET_EVENT_B[6:0], and RESET_EVENT_C[6:0]. If one of the registers is 0, that register is not used for reset generation. All reset events must be detected at the same time to trigger the reset. RESET_EVENT_B, Register 0x2C Table 53. RESET_EVENT_B Bit Descriptions Bits Bit Name Access Description 7 RESET_EVENT_B_LEVEL Read/write Defines which level the second reset event should be to generate the RESET_OUT signal. Refer to Table 52. [6:0] RESET_EVENT_B[6:0] Read/write Defines an event that can be used to generate the RESET_OUT signal. See Table 12. RESET_EVENT_C, Register 0x2D Table 54. RESET_EVENT_C Bit Descriptions Bits Bit Name Access Description 7 RESET_EVENT_C_LEVEL Read/write Defines which level the third reset event should be to generate the RESET_OUT signal. Refer to Table 52. [6:0] RESET_EVENT_C[6:0] Read/write Defines an event that can be used to generate the RESET_OUT signal. See Table 12. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
