| 数据搜索系统,热门电子元器件搜索 |
|
PCF8563P/F4 数据表(PDF) 17 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
PCF8563P/F4 数据表(HTML) 17 Page - NXP Semiconductors |
|
17 / 50 page ![]() PCF8563 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved. Product data sheet Rev. 10 — 3 April 2012 17 of 50 NXP Semiconductors PCF8563 Real-time clock/calendar 8.7 Register CLKOUT_control and clock output Frequencies of 32.768 kHz (default), 1.024 kHz, 32 Hz, and 1 Hz can be generated for use as a system clock, microcontroller clock, input to a charge pump, or for calibration of the oscillator. [1] Default value. 8.8 Timer function The 8-bit countdown timer at address 0Fh is controlled by the Timer_control register at address 0Eh. The Timer_control register determines one of 4 source clock frequencies for the timer (4096 Hz, 64 Hz, 1 Hz, or 1⁄60 Hz), and enables or disables the timer. The timer counts down from a software-loaded 8-bit binary value. At the end of every countdown, the timer sets the timer flag TF. The TF may only be cleared by using the interface. The asserted TF can be used to generate an interrupt on pin INT. The interrupt may be generated as a pulsed signal every countdown period or as a permanently active signal which follows the state of TF. Bit TI_TP is used to control this mode selection. When reading the timer, the current countdown value is returned. 8.8.1 Register Timer_control [1] Default value. [2] These bits determine the source clock for the countdown timer; when not in use, TD[1:0] should be set to 1⁄60 Hz for power saving. Table 22. CLKOUT_control - CLKOUT control register (address 0Dh) bit description Bit Symbol Value Description 7 FE 0 the CLKOUT output is inhibited and CLKOUT output is set high-impedance 1[1] the CLKOUT output is activated 6 to 2 - - unused 1 to 0 FD[1:0] frequency output at pin CLKOUT 00[1] 32.768 kHz 01 1.024 kHz 10 32 Hz 11 1 Hz Table 23. Timer_control - timer control register (address 0Eh) bit description Bit Symbol Value Description 7TE 0[1] timer is disabled 1 timer is enabled 6 to 2 - - unused 1 to 0 TD[1:0] timer source clock frequency select[2] 00 4.096 kHz 01 64 Hz 10 1 Hz 11[2] 1⁄60 Hz |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |