| 数据搜索系统,热门电子元器件搜索 |
|
ADM1275-1ACPZ-R7 数据表(PDF) 37 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADM1275-1ACPZ-R7 数据表(HTML) 37 Page - Analog Devices |
|
37 / 48 page ![]() Data Sheet ADM1275 Rev. D | Page 37 of 48 OPERATION Code: 0x01, read/write byte. Value after reset: 0x80. Table 12. Bit Descriptions for OPERATION Command Bits Bit Name Settings Description 7 ON 0 Hot-swap output is disabled. 1 Default. Hot-swap output is enabled. [6:0] Reserved 0000000 Always reads as 0000000. CLEAR_FAULTS Code: 0x03, send byte, no data. CAPABILITY Code: 0x19, read byte. Value after reset: 0xB0. Table 13. Bit Descriptions for CAPABILITY Command Bits Bit Name Settings Description 7 Packet error checking 1 Always reads as 1. Packet error checking (PEC) is supported. [6:5] Maximum bus speed 01 Always reads as 01. Maximum supported bus speed is 400 kHz. 4 SMBALERT# 1 Always reads as 1. Device supports SMBAlert and alert response address (ARA). [3:0] Reserved 0000 Always reads as 0000. VOUT_OV_WARN_LIMIT Code: 0x42, read/write word. Value after reset: 0x0FFF. This command is supported on the ADM1275-1 and the ADM1275-3. The ADM1275-2 does not have a VOUT pin. Table 14. Bit Descriptions for VOUT_OV_WARN_LIMIT Command Bits Bit Name Settings Description [15:12] Reserved 0000 Always reads as 0000. [11:0] VOUT_OV_WARN_LIMIT Overvoltage threshold for the VOUT pin measurement, expressed in ADC codes. VOUT_UV_WARN_LIMIT Code: 0x43, read/write word. Value after reset: 0x0000. This command is supported on the ADM1275-1 and the ADM1275-3. The ADM1275-2 does not have a VOUT pin. Table 15. Bit Descriptions for VOUT_UV_WARN_LIMIT Command Bits Bit Name Settings Description [15:12] Reserved 0000 Always reads as 0000. [11:0] VOUT_UV_WARN_LIMIT Undervoltage threshold for the VOUT pin measurement, expressed in ADC codes. IOUT_OC_WARN_LIMIT Code: 0x4A, read/write word. Value after reset: 0x0FFF. Table 16. Bit Descriptions for IOUT_OC_WARN_LIMIT Command Bits Bit Name Settings Description [15:12] Reserved 0000 Always reads as 0000. [11:0] IOUT_OC_WARN_LIMIT Overcurrent threshold for the IOUT measurement through the sense resistor, expressed in ADC codes. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |