AN4192 datasheet(21/47 Pages) STMICROELECTRONICS

部件名	AN4192

功能描述	In the latest generation of CPUs for modern desktop and notebook platforms

PDF	47 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

21 / 47 page

AN4192

Low-side FET selection

Doc ID 023820 Rev 1

21/47

In the following table the main electrical parameters of the two tested LS FETs are reported.

The high-side FET used is called “HS”.

As shown in the previous table, the “LS1” has higher RDS(on), but slightly lower total gate

charge. In Figure 21 the relevant efficiency curves are depicted; at low output currents, the

LS1, due to its slightly lower Qg and then switching/gate drive losses, has higher efficiency.

But, at medium and heavy load conditions, the RDS(on) improvement makes “LS2” the best

in terms of efficiency.

Figure 21.

Efficiency vs. Iout @ Vout = 1.25 V

3.2

CGD (Miller capacitance)

The Miller capacitance (Cgd) plays a crucial role in the LS switching behavior improvement.

As already known, before the HS turns on, the load current flows through the LS body-drain

diode (deadtime) (Figure 22, green trace, I2).

Table 3.

Main electrical parameters

BV [V]

RDS(on) [mΩ]Qg,SW [nC]

8.5

LS1

LS2

5.2

AM16465V1

AN4192 数据表(PDF) 21 Page - STMicroelectronics