| 数据搜索系统,热门电子元器件搜索 |
|
AN2784 数据表(PDF) 22 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN2784 数据表(HTML) 22 Page - STMicroelectronics |
|
22 / 31 page ![]() Interfacing with an 8-bit NAND Flash memory AN2784 22/31 Doc ID 14779 Rev 4 Figure 10. NAND memory access timing 4.1.1 Typical use of the FSMC to interface with a NAND memory The STM32F10xxx FSMC NAND Flash controller can configure Bank2 or Bank3 to support NAND Flash memories. The banks are selected using the Chip Select signals, as each bank is associated with a specific Chip Select. To enable communication with the NAND Flash devices, the FSMC NAND Flash controller has to be initialized to meet the characteristics of the NAND Flash devices: features, timings, data width, etc. In this application note, the Numonyx NAND512W3A is used as the reference. This memory has the same access protocol as many other NAND Flash memories on today’s market. NAND512W3A characteristics: ● NAND interface: x8 bus width, multiplexed address/ data ● Page size: x8 device: (512 + 16 spare) bytes ● Page Read/Program timings: – Random access: 12 µs (3 V)/15 µs (1.8 V) (max) – Sequential access: 30 ns (3 V)/50 ns (1.8 V) (min) – Page Program time: 200 µs (typ) NCE NOE NWE Write Data Read Data SET + 1 WAIT + 1 HOLD + 1 HCLK A[25:0] HiZ + 1 ai15183 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |