MPC8264AVR datasheet(42/48 Pages) MOTOROLA

42 / 48 page

MPC826xA (HiP4) Family Hardware Speciﬁcations

MOTOROLA

Pinout

Symbols used in Table 19 are described in Table 20.

I/O power

AG21, AG14, AG8, AJ1, AJ2, AH1, AH2,

AG3, AF4, AE5, AC27, Y27, T27, P27,

K26, G27, AE25, AF26, AG27, AH28,

AH29, AJ28, AJ29, C7, C14, C16, C20,

C23, E10, A28, A29, B28, B29, C27,

D26, E25, H3, M4, T3, AA4, A1, A2, B1,

B2, C3, D4, E5

Core Power

U28, U29, K28, K29, A9, A19, B19, M1,

M2, Y1, Y2, AC1, AC2, AH19, AJ19,

AH10, AJ10, AJ5

Ground

AA5, AF21, AF14, AF8, AE7, AF11,

AE17, AE23, AC26, AB25, Y26, V25,

T26, R25, P26, M25, K27, H25, G26,

D7, D10, D14, D16, D20, D23, C9, E11,

E13, E15, E19, E22, B3, G5, H4, K5,

M3, P5, T4, Y5, AA2, AC3

1 MPC8265 and MPC8266 only.

2 The default conﬁguration of the CPM pins (PA[0–31], PB[4–31], PC[0–31], PD[4–31]) is input. To prevent excessive

DC current, it is recommended to either pull unused pins to GND or VDDH, or to conﬁgure them as outputs.

3 On PCI devices (MPC8265 and MPC8266) this pin should be used as CLKIN2. On non-PCI devices (MPC8260A

and MPC8264) this is a spare pin that must be pulled down or left ﬂoating.

4 Must be pulled down or left ﬂoating.

5 On PCI devices (MPC8265 and MPC8266) this pin should be asserted if the PCI function is desired or pulled up

or left ﬂoating if PCI is not desired. On non-PCI devices (MPC8260A and MPC8264) this is a spare pin that must

be pulled up or left ﬂoating.

6 For information on how to use this pin, refer to MPC8260 PowerQUICC II Thermal Resistor Guide available at

www.motorola.com/semiconductors.

Table 20. Symbol Legend

Symbol

Meaning

OVERBAR

Signals with overbars, such as TA, are active low.

UTM

Indicates that a signal is part of the UTOPIA master interface.

UTS

Indicates that a signal is part of the UTOPIA slave interface.

UT8

Indicates that a signal is part of the 8-bit UTOPIA interface.

UT16

Indicates that a signal is part of the 16-bit UTOPIA interface.

MII

Indicates that a signal is part of the media independent interface.

Table 19. Pinout List (Continued)

Pin Name

Ball

MPC8264AVR 数据表(PDF) 42 Page - Motorola, Inc

MPC8264AVR 数据表(HTML) 42 Page - Motorola, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

数据表下载