H7CX-R11W-N datasheet(10/56 Pages) OMRON

10 / 56 page

H7CX-A

@-N

Nomenclature

Dimensions

(Unit: mm)

Counters

(Enable)

(Default setting) OFF

(Disable)

RST

1st digit

4th digit

1st digit

6th digit

Display Section

3. Reset Indicator (orange)

1. Key Protect Indicator (orange)

2. Control Output Indicator (orange)

4. Total Count Indicator

6. Set Value 1, 2 Stage Indicator

8. Set value (Sub-display)

(Character height: 6 mm, green)

9. Hold Display (orange)

OUT: (One-stage)

OUT:

(Two-stage)

(Lit when the total count value is displayed.)

(Lit when the reset input (1) or Reset Key is ON.)

Displayed only when the configuration selection

mode is not tachometer mode.

5. Batch Indicator

(Lit when the batch count value is displayed.)

Operation Keys

10. Mode Key

(Changes modes and setting items.)

11. Reset Key (See note.)

12. Up Keys

(6-digit models:

)

13. Down Keys

Switches

14. Key-protect Switch

15. DIP Switch

7. Present Value (Main Display)

(Character height: 12 mm (6-digit: 10 mm), red*)

(Front view of 4-digit model)

(Front view of 6-digit model)

* Characters on models with screw terminals (H7CX-A11

can be switched between red, green, and orange.

Displayed only when the configuration selection

mode is not tachometer mode.

OFF

12345678

Note: The reset functions depends on the selected configuration.

Configuration

Reset operation

1-stage/2-stage

preset counter

Resets the present value and outputs.

Total and preset

counter

• Resets the present value and outputs.

• When the total count value is displayed, resets the

present value, the total count value, and outputs.

Batch counter

• Resets the present value and OUT2.

• When the batch count value is displayed, resets the

present value, the batch count value, and outputs.

Dual counter

Resets the CP1 present value, CP2 present value, dual

count value, and outputs.

Twin counter

Resets the CP1 present value and output 1 when the

CP1 present value is displayed.

Resets the CP2 present value and output 2 when the

CP2 present value is displayed.

Tachometer

Holds the measurement value and outputs (hold

function).

(When the input mode is 2-input independent

measurement, the CP1 measurement value display will

hold the CP1 measurement value and output 1 and the

CP2 measurement value display will hold the CP2

measurement value and output 2.)

Model with 4 Digits

6 mm

12 mm

Character Size

for Sub-display

Character Size

for Main Display

Model with 6 Digits

10 mm

6 mm

Character Size

for Sub-display

Character Size

for Main Display

44.8

× 44.8

× 48

H7CX-A-N/-AS-N/-AW-N/-AWS-N/-AWD1-N/-AWSD1-N/-A4-N/-A4S-N/-A4W-N/-AU-N/-AUD1-N/-AUSD1-N

(Flush Mounting Models)

Note: M3.5 terminal screw (effective length: 6 mm)

H7CX-R11W-N 数据表(PDF) 10 Page - Omron Electronics LLC

H7CX-R11W-N 数据表(HTML) 10 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

数据表下载

链接网址

H7CX-R11W-N 数据表(PDF) 10 Page - Omron Electronics LLC

H7CX-R11W-N 数据表(HTML) 10 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

数据表 下载

链接网址

数据表下载