STM32F413XG datasheet(158/207 Pages) STMICROELECTRONICS

部件名	STM32F413XG

功能描述	ARM-Cortex-M4 32b MCUFPU, 125 DMIPS, up to 1.5MB Flash, 320KB RAM, USB OTG FS, 1 ADC, 2 DACs, 2 DFSDMs

PDF	207 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

158 / 207 page

Electrical characteristics

STM32F413xG/H

158/207

DocID029162 Rev 2

6.3.26

FSMC characteristics

Unless otherwise specified, the parameters given in Table 87 to Table 94 for the FSMC

interface are derived from tests performed under the ambient temperature, fHCLK frequency

and VDD supply voltage conditions summarized in Table 15, with the following configuration:

•

Output speed is set to OSPEEDRy[1:0] = 10

•

Capacitance load C = 30 pF

•

Measurement points are done at CMOS levels: 0.5.VDD

Refer to Section 6.3.16: I/O port characteristics for more details on the input/output

characteristics.

Asynchronous waveforms and timings

Figure 53 through Figure 56 represent asynchronous waveforms and Table 87 through

Table 94 provide the corresponding timings. The results shown in these tables are obtained

with the following FSMC configuration:

•

AddressSetupTime = 0x1

•

AddressHoldTime = 0x1

•

DataSetupTime = 0x1 (except for asynchronous NWAIT mode, DataSetupTime = 0x5)

•

BusTurnAroundDuration = 0x0

In all timing tables, the THCLK is the HCLK clock period.

STM32F413XG 数据表(PDF) 158 Page - STMicroelectronics