QS5.DNET

Q-Series

EC Declaration of Conformity

The CE mark indicates conformance with the EMC directive

2004/108/EC, the low-voltage directive (LVD) 2006/95/EC and

the RoHS directive 2011/65/EC.

DeviceNet conformance tested by the Open DeviceNet®

Vendor Organization.

IEC 60950-1

CB Scheme,

Information Technology Equipment

UL 508

IND. CONT. EQ.

Listed for use as Industrial Control Equipment;

U.S.A. (UL 508) and Canada (C22.2 No. 107-1-01);

E-File: E198865

UL 60950-1

Recognized for use as Information Technology Equipment,

Level 5; U.S.A. (UL 60950-1) and Canada (C22.2 No. 60950-1);

E-File: E137006

ANSI / ISA 12.12.01-2007

(Class I Div 2)

Recognized for use in Hazardous Location Class I Div 2 T4

Groups A,B,C,D systems; U.S.A. (ANSI / ISA 12.12.01-2007)

and Canada (C22.2 No. 213-M1987)

The unit is suitable for use in Class I Division 2 Groups A, B, C, D locations.

Substitution of components may impair suitability for Class I Division 2 environment.

Do not disconnect equipment unless power has been switched off. Wiring must be in

accordance with Class I, Division 2 wiring methods of the National Electrical Code,

NFPA 70, and in accordance with other local or national codes.

Marine

GL (Germanischer Lloyd) classified and

ABS (American Bureau for Shipping) PDA

Environmental category: C, EMC2

Marine and offshore applications

SEMI F47

SEMI F47-0706

Ride-through compliance for semiconductor industry.

Full SEMI range compliance

(Input: AC120V or higher, output: < 91.2W)

GOST P

Certificate of Conformity for Russia and other GUS countries

EN 61558-2-17

Safety of Power Transformers

EN/IEC 60204-1

Safety of Electrical Equipment of Machines

EN/IEC 61131-2

Programmable Controllers

EN 50178, IEC 62103

Electronic Equipment in Power Installations

Mar. 2013 / Rev. 2.2 DS-QS5.DNET-EN

All parameters are specified at 24V, 3.8A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

15/21