STM32F769AI datasheet(20/255 Pages) STMICROELECTRONICS

20 / 255 page

Functional overview

STM32F765xx STM32F767xx STM32F768Ax STM32F769xx

20/255

DocID029041 Rev 4

Functional overview

2.1

ARM® Cortex®-M7 with FPU

The ARM® Cortex®-M7 with FPU processor is the latest generation of ARM processors for

embedded systems. It was developed to provide a low-cost platform that meets the needs of

MCU implementation, with a reduced pin count and low-power consumption, while

delivering an outstanding computational performance and low interrupt latency.

The Cortex®-M7 processor is a highly efficient high-performance featuring:

–

Six-stage dual-issue pipeline

–

Dynamic branch prediction

–

Harvard caches (16 Kbytes of I-cache and 16 Kbytes of D-cache)

–

64-bit AXI4 interface

–

64-bit ITCM interface

–

2x32-bit DTCM interfaces

The processor supports the following memory interfaces:

•

Tightly Coupled Memory (TCM) interface.

•

Harvard instruction and data caches and AXI master (AXIM) interface.

•

Dedicated low-latency AHB-Lite peripheral (AHBP) interface.

The processor supports a set of DSP instructions which allow an efficient signal processing

and a complex algorithm execution.

It supports single and double precision FPU (floating point unit), speeds up software

development by using metalanguage development tools, while avoiding saturation.

Figure 2 shows the general block diagram of the STM32F76xxx family.

Note:

The Cortex®-M7 with FPU core is binary compatible with the Cortex®-M4 core.

2.2

Memory protection unit

The memory protection unit (MPU) is used to manage the CPU accesses to memory to

prevent one task to accidentally corrupt the memory or resources used by any other active

task. This memory area is organized into up to 8 protected areas that can in turn be divided

up into 8 subareas. The protection area sizes are between 32 bytes and the whole 4

gigabytes of addressable memory.

The MPU is especially helpful for applications where some critical or certified code has to be

protected against the misbehavior of other tasks. It is usually managed by an RTOS (real-

time operating system). If a program accesses a memory location that is prohibited by the

MPU, the RTOS can detect it and take action. In an RTOS environment, the kernel can

dynamically update the MPU area setting, based on the process to be executed.

The MPU is optional and can be bypassed for applications that do not need it.

STM32F769AI 数据表(PDF) 20 Page - STMicroelectronics

STM32F769AI 数据表(HTML) 20 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载